Corded electri blower...i lost the manual...it's been forever since i used the vacuum and need a little help joggin my memory...help!!Electric

for some reason your model number is not recognised. There are the places for spares.

Craftsman electric leaf blower parts ' Sears PartsDirect

https://www.searspartsdirect.com > combo > craftsman-...
Common replacement parts for Craftsman electric leaf blowers · Power cord. The power cord provides the leaf blower motor with electric current. · Blower fan blade ...

• 
  

  Leaf blower parts ' Sears PartsDirect

  https://www.searspartsdirect.com > category > leaf-blow...
  Leaf blowers can wear down with use over time. Sometimes the problem can be fixed with a simple cleaning, or other times a specific part may need to be replaced ...

Craftsman Blower Parts ' Fast Shipping - eReplacementParts ...

https://www.ereplacementparts.com > craftsman-blower...
Craftsman Blower parts that fit, straight from the manufacturer. Use our interactive diagrams, accessories, and expert repair help to fix your Craftsman ...

..

GO TO THIS LINK BELOW INSTRUCTIONS AND PICTURES
http://lib.store.yahoo.net/lib/vacuumcleanerbacgs/bissell-proheat-carpet-cleaner-service-manual.pdf

Ahh 87. Nice car.. Well since you have an Electric issue, I can't tell you how to check for shorts and other items BUT you can get a Vacuum tee and tie into a working Vacuum line and add a small 1/4 inch vacuum line to the Heater control valve on the passenger side engine heater hose and that will start sending the hot water/coolant into the heater core, I hope your blower works you would have heat, I really never like that auto Climate systems.. But that will give you some heat and give you more time to get the dash to work.. BCB...

Make sure all electric is off strip off plastic covers on all parts of the cordes to be attached about 5incs easy to do with a razor slice on both sides or wire strippers then twist wires together and wrap with black electrical tape. Plug in and should have power

If it has not run for awhile, check the brushes. they might need to be replaced. The plug is usually moulded right on power cord. That might have to be replaced because if there is a problem with a broken or disconnected wire right at plug there is no way to see it. Hope this helps.

turn your blower upside down, there should be a slot with a metal thing in it. Stick a Flat head screwdriver in the slot, and push forward or back on the screwdriver, that should open the door on the bottom. Attach your bigger tubes to the bottom of the unit, and the bag on the plower part, and there's your vacuum.

I have a gold mixer also, My wife loves it. The cord went
and was unfixable. I found one on this website abtecparts.com.
The cord was $5.99 plus shipping. Good Luck
Pat

You should have another door that goes in front of the impeller (blade) which doesn't have a vacuum attachment. You should first detach the vacuum door from the bottom, put on the blower tube, and install the other door that came with the blower. Hope that helps.

Mine is a Black & Decker so I don't know if this will help. On mine there is one release button near the top of the handle. You press that down to release and remove either the blower tube or the vacuum bag assembly, whichever is currently on -- you can't have both! Then you engage the attachment you want to put on into a pivot at the bottom of the handle assembly, press the release button and engage the attachment at the top.

Check an see if a branch or something got caught in the blower an won't let it turn, if it hums that could be the problem