More info is needed. Do hear any fans or hard drives spinning up? Do you hear any beeps? Do you see anything on the monitor, or does it remain in sleep mode when the PC is powered up?
If your computer will not boot try to first boot your hard drive in the BIOS. Make sure that the hard drive are inserted correctly replace the power cable in your hard drive also the SATA or IDE cable.
Regards ICmanServer
Was this helpful?
Yes
No
Popular Solutions for HP Pavilion a1220n PC Desktop
I'm building a desktop from scratch. The new motherboard came with a faceplate that has little...
(More)
I'm building a desktop from scratch. The new motherboard came with a faceplate that has little fingers around some the holes. Do those need to be taken off or just bent out of the way?
I work with hand drawn illustrations that I scan as bitmaps and would like to change theminto vector...
(More)
I work with hand drawn illustrations that I scan as bitmaps and would like to change theminto vector based illustrations to colour them in using either illustrator or photoshop. Open paths are a problem while colouring in the illustrations so how would I close open paths on these vectors?
i have a emachines et1161-01 snid#83701753390 and the REG_SZ data value is not set. can you help me...
(More)
i have a emachines et1161-01 snid#83701753390 and the REG_SZ data value is not set. can you help me set the value for this ???
HP Compaq 5311SR Desktop with XP. I changed the power supply but am unsure on which connector...
(More)
HP Compaq 5311SR Desktop with XP. I changed the power supply but am unsure on which connector attaches on the bottom front. I am looking for some kind of chart to verify which number connectors go where. P3, P2, P4, etc.
The drive on this PC got corrupted. I formatted it and tried to reinstall windows xp. Got all sorts...
(More)
The drive on this PC got corrupted. I formatted it and tried to reinstall windows xp. Got all sorts of unable to copy file so-and-so during setup. Put in another drive....same messages.... put in another cd-rom...same messages.... The majority of setup files are copied ok to the hard drive but because of the missing files it could NOT copy the entire installation eventually crashes!!! :-( put in HP's own recovery disks....same messages....and eventually crashes. Does ANYONE have ANY idea what is going on??? If you can help please post her or write me: veryounique at hotmail com THANKS!!! :-)
Add the things you own to your My Products collection and get product information, solutions to problems, manuals & guides, tips and how-to's, reviews & ratings and local repair service - all in one easy place.