Why does my bluetooth speaker keep beeping even when plugged into wall?

Power on the Harmon Kardon by pressing and holding the power button until it beeps.
then, press and hold the Bluetooth button (on H.K. Speaker) until it beeps.
Make the Samsung UN46EH5300 Bluetooth to be VISIBLE.
The H.K. will emit an audible when successfully paired.

On the rear of the speaker, you should see a female receptacle, probably the same as your phone. the other end is a usb which would plug into the computer to charge or you can pick up a 5volt wall charger that the usb cable plugs into and the charger plugs into the wall. Any walmart, fry's, radio shack has the readily available.

This Bluetooth speaker does not have a battery inside. You need to attach the included 5V power supply and keep it plugged in for the tower to operate correctly.

That's because the speakers are broken. Look in the User guide for reset instructions. If that doesn't work buy new speakers.

On the iphone in bluetooth menu delete all soma speakers.
on the soma put it into bluetooth discovery mode
on the iphone wait till soma speaker shows up
select the soma speaker NOT the arrow on the right side
wait till the iphone reads 'connected'
if you are asked for a passcode use 0000

Back to the shop. Or look in the manual. Next time you better place a problem like this in the category audio, or speakers. It accedentely? is between Digital camera's.

LOL. This is a common, easily solveable problem. Remove your cellphone or anything that emits radiation of any sort from the general area. Don't believe me? send a text message while sitting net to your computer. It does this even if you arent sending a message because your phone sends intermittent signals to the cell tower.

Hi,
I understand that you are getting beep sounds from your bluetooth device. Although it is an irritating reminder, there should be some ways to it off. As you havnt mentioned your device exact model in your question, I could not provide specific solution to your problem. i would recommend you to seek information about this in your device user manual or provide your device model,

Thanks