I need a battery cover for a Taylor 7506 scale. Where can I find this?

Try setting up your scale again, following the instructions found int he first section here: http://www.taylorusa.com/faq-scales

Turn it over - take out battery and check with multimeter to ensure it is still workable - let sit for 10 to 15 seconds - replace battery - set it on level surface and step on and back off. Step on it again and it should now work.

The Instruction Book for your scale can be found here:

http://www.taylorusa.com/media/IBs/7506_ib.pdf

Sounds like no power. Check for correct battery replacement; may need to verify that your replacement batteyr is still good.

Battery Replacement

1. Use 3 volt CR2032 lithium battery (as installed).

2. Open the battery compartment on the bottom of the scale.

3. Remove the old battery from the compartment.

4. Place the new battery with the "+" sign up into the battery compartment.

5. Replace the battery compartment cover.

The lithium battery is a 3-Volt CR2032. The manual for the scale is available here: http://www.taylorusa.com/media/IBs/7506_ib.pdf . Additional information and a link to the manual is available here: http://www.taylorusa.com/weight-management/glass-electronic-scales/glass-lithium-electronic-scale.html .

I hope this helps.

Cindy Wells

check battery or power supply first

I know what is this error. This is BATTery low. New battery last only 2 month, I've seen a problem with the kick feature to power-on the scale, those pressure buttons might get stuck and leak current and kill the battery.

turn it over and open the battery compartment. CR2032 battery

in that case you need to get in touch with the manufacturer

This link allows you to troubleshoot directly with the company...I hope this helps.

http://www.taylorusa.com/advantage/root/contact.html