Question about Toto Aquia II Dual Flush Toilet

1 Answer

Toto CST853 cistern will not refill. Was fine yesterday. City is working on pipes and broke a water main last evening, all other faucets and toilets are working....can I clean the water filter or does it need to be replaced...I think that I have a debris clog..thanks

Posted by on

  • tvjpresti Aug 01, 2009

    Thank you Mr. Guru...My "pump" is a Hunter...screwed off
    There was some debris. The water valve had the most.
    I removed the flexible hose (not flexible in mine) and
    turned the water back on a bit...out came major debris.
    So the toilet now works...BUT it won't stop running....
    Now I have to fix that...this is the powder room tight
    spaces..oh, well...what did I have to do on a Sat. afternoon anyway....Thank you again....vsp

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 117 Answers

Alot of times you can turn the water off to the toilet and the tops of the fill valves usually pop or screw off. then if you put a small cup over the top of the fill valve you can turn it back on and flush the debris out and put it back together. if its a fluid master type you can pop the top off it. and turn the float arm a 1/4 to half turn and the whole top will come off

Posted on Aug 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a toto toilet , model MS604114CEFG , bought 2 years ago . Last night , when I flushed it , the water level in the toilet bowl did not come down . It stay high in the bowl . In the tank reservoi


If the toilet is the only fixture in the bathroom group that is having an issue, then there is a partial blockage in Strap of toilet or in drain pipe close to toilet. If other fixtures are showing sluggish drainage, then the main drainage line is clogged. If all is fine with tub lav shower etc., pull toilet from floor and carefully turn upside down, and look to see if anything is visable. if so remove it and reinstall with new seal(wax ring). Also, look into pipe and see if any water is standing in it. If water is standing in pipe, the drain line is clogged and must be rodded(snaked) out to cure problem

Nov 14, 2014 | Toto MS604114CEFG01 UltraMax II Toilet,...

Tip

FIXING A TOILET THAT WILL NOT FLUSH!!! a simple but very effective money saving...


This simple how to, is based upon most lever operated toilets, with the cistern mounted above the toilet bowl. The make and model of toilet used for this feature is of the following:
Toilet and internal syphon
DUDLEY ELITEDudley S7 Cascade syphon
Problem:
My toilet will not flush, but the ball float valve is working and there is water in the cistern; no leaks present and the flushing lever is not broken or disconnected, what do I do?
Answer:
first isolate the water to the toilet or the main water supply to the house. Bail out the water from the cistern using a small jug or cup, (or you can syphon the water manually using a hosepipe or similar pipe, a towel to cover your mouth, and either a bucket or the toilet bowl) and remove water from the bottom of the cistern with a sponge.


Changing the syphon in a toilet that is not close coupled is far easier as you do not need to remove the cistern from the wall!


Undo the lower of the two large nuts beneath the cistern using a large pipe wrench or pair of water pump pliers, now disconnect the flush pipe and push it to one side.
Place a bucket or bowl beneath the cistern and undo the Nut which is immediately below the cistern (syphon replacing nut), some water may be released by the syphon, take note of any washers that are removed as new ones need fitting when replacing the siphon.
Unhook the lift rod from the flushing lever and remove the syphon.


Inside the toilet syphon, there will be a small plastic piece of sheet called a diaphragm; you can fabricate a replacement using the plastic title cover on a DVD case. Cut this to the exact same size and shape as the original part, and fit this to where the original diaphragm was. This is your new replacement.


Refitting is a complete reversal of removal, be sure to fit any washers (preferably new ones) that you have taken out. Ensure everything is tight but do not over tighten before refilling the cistern



on Aug 09, 2010 | Plumbing

1 Answer

My toto toilet flushes and refills fine, but it just started making loud noises when refilling. The noise stops when the tank is full


Your fill valve is going bad it can be replace with a new fluidmaster instead of the Ultra-G you have in it its going bad they do over time you may want to check your house water pressure in case that may have been what broke it you don';t want to break a new one.

Aug 29, 2011 | Toto MS853113S#11 UltraMax Round Toilet,...

1 Answer

After a water main problem in the neighborhood was worked on with my home losing water pressure the water in the house became airborne. My toto gmax flushed once or twice with brown water and then...


turn off water to toilet.Take the three top screws out of the flush valve .Which is that valve the water pours out from to fill the tank.clean the diaphram inside.Probably see alot of dirt inside.You'll probably want to take all your aerators off your faucets and flush the dirt out of them too

Jan 21, 2011 | Home

1 Answer

Gravity fed toilet cistern-no water feed.


First I would disconnect the supply line and see if I have water to that point. If so, than take apart or replace the ballcock or float valve. If not continue to trace problem backward untill found. Hope this helps.

May 11, 2010 | Plumbing

2 Answers

How do i fix a cistern that is continually leaking in to the toilet bowl? i have tried to open the cistern at the flush button unit but do not want to force open. tried twisting but is quite tight.


most modern toilets do not have an overflow pipe to outside instead they overflow into the bowl itself so have to adjust level so it does not overflow into return

Apr 02, 2010 | Toto Aquia II Dual Flush Toilet

2 Answers

Toto toilet


check the pipe connection from water tank

Mar 17, 2010 | Toto Washlet S400 for Power Gravity...

1 Answer

Toto fill valve continual problem, new toilet


There are cheep fill valves and ther better built fill valves, so make sure you buy aa quality fill valve. Also buy a pressuer gauge at ahard ware store and check water pressure level at a faucet outlet. Screw gauge onto water fauct leave a little room for air to escape when water is drippng out tighten the hose bib on the gage turn on the faucet and read the pressure. If it's more than 50 PSI you need to lower the water pressuer. I need to know if your on a, on site underground well,or are on city water to tell you what you need to do to to fix this problem. If there is one. thanks for using Fix-ya if you want more info post here.
Avid101

Aug 19, 2009 | Home

2 Answers

Toilet cistern doesn't fill up


it sounds like one or more of your shut off valves has a glog from hard water calcium. were from indiana its a big problem here.To check this u will have to shut off main water supply and remove top of shut off valve and check for white crusty blockage, even if u see a few particals its present. It can severely restrict flow.

Apr 21, 2009 | Kallista Michael S Smith Country Elongated...

1 Answer

Toilet tank will not refill with water after flushing


I fixed the problem. There was a clog in the pipes so i just flushe dthe pipes out.
thanks,
for your help

Jan 17, 2009 | Toto Carlyle 1-piece Elongated Bowl Toilet

Not finding what you are looking for?
Toto Aquia II Dual Flush Toilet Logo

Related Topics:

1,182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toto Home Experts

Donni Steen

Level 3 Expert

659 Answers

john h

Level 3 Expert

11057 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Toto Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...