Have redi-remote replacement, for naxa tv. need instructions.
SOURCE: remote control codes for naxa tv model nx -524
You neglected to post the Remote's Make and Model. However, most Univ. remotes allow you to "Scan" the TV codes one at a time. You would do this and watch for the TV to turn off. when it does, you have the code and can store it.
Geno
SOURCE: I need the owners manual for the Redi Smoke electric smoker.
I might have one if its the same redi smoke that was made in Houston Texas about twenty years ago or so...wimberman
SOURCE: Need to program my naxa remote to my naxa tv but,
Click on this link to get a replacement manual for your Naxa electronics NX-556 LCD TV
http://www.naxaelectronics.com/index.php/pages/4/
SOURCE: Need a NAXA remote code for dish network Remote
Hopefully you have resolved this issue, but if you have any additional problems or questions, here is some help. Follow the directions below, and that remote will be programmed right away.
1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.
Becki Barned
DISH Network Customer Service
47 views
Usually answered in minutes!
×