How do i clear out my totals on a ER-A330 cash register. Also how do i do voids. how do i run a daily total

If you find the net total, that should be the total after discounts and refunds, voids etc so that is the actual money you should have at the end of the day

Cash Register Help: SAM4s ER-650 Cash Register

cashregisterhelp.blogspot.com/2008/05/sam4s-er-650-cash-register.html

May 1, 2008 - I really like the SAM4s ER-650 Cash Register and ER-650R Cash Register. ... By the way the SAM4s ER-650 and ER-650R is the same as the Samsung ER-650 and ... I can't seem to figure out how to program it to track ticket/check #'s. .....also, neither the Reg Key or Mode Key will turn to SM mode. help?

Samsung Cash Registers ' ER650 Bar Code Scanner ...

www.maxperience.com > ... > Cash Registers

If not, you will need to go to the SM mode and configure either RS-232 port 1 or port 2... Press enter (cash key) through the rest of the options. ... I could not get the curserinto the plu numeric field once i entered the plu. .... There are manuals for the SAM4s ER-650 at http://www.cashregisterguys.com and if you are looking for ...

Samsung Cash Registers ' Samsung ER 650 Deleting PLUs ...

Turn your key toZ and press decimal then subtotal

Not sure what you mean by new and old grand total. There is normally one grand total and that should print by default. It is affected by everything you do. It can't usually be edited or reset as it is there to stop fraud. Most people do not use it. You only need the daily totals that get reset after a Z report

Identify yourself. Press 1 then clerk but6ton

I can't believe we still have a book for this one - the ER2385 began production in 1987!
Most business owners take their totals daily. You probably have, too, by turning the key to Z1 and touching
. CA/AT (I hope you can the decimal point in front of the CA/AT. It's essential.)
To take monthly totals, do exactly the same thing, but in the X2/Z2 position.
Note that these totals are monthly only because you print them monthly. If you do it every Saturday night, you'll get weekly totals. The register prints totals that have accumulated since the last time you took a Z2 reading. It's up to you to make them monthly by taking them monthly.
So, on January 31 take your usual nightly total, then the Z2 total. Taking the daily one first ensures that today is included in the month.
Skipping the decimal point before the CA/AT will give you an X2 total. The same numbers will be printed, but they won't be cleared back to zero. That's fine if you want to see your totals so far, without messing them up, but if you forget it at the end of January, then February's totals will include both months. The same rule applies to daily totals. Use the decimal point if you want the numbers cleared.
While the CA/AT key gives the familiar department totals, other readings are available.
PLU gives your PLU totals, if you use them. (X1 and Z1 only)
#/TM gives totals for each hour of the day (X1 and Z1 only)
SBTL gives a total for each day of the month (X2/Z2 only)

I think you mean your end-of-day money totals:
Turn the key to X1/Z1
Touch the decimal point, then the CA/AT/NS (CAsh, Amount Tendered, No Sale) button - or maybe it's just CA/AT on the -A330.
It will print out a Z reading: the day's sales totals and clear them back to zero, except the Grand Totals at the top of the tape.
If you skip the decimal point it will print an X reading: the same tape, but will not clear the totals, so they can continue building. You can print an X tape several times a day if you're curious about sales, so far, without messing up anything.
I talk about Z totals as a daily total, but they accumulate for as long as you let them, before taking a Z reading. It is only a daily report as long as you take it daily, as most business owners do.

I believe the ER-A330 has a Cashier # button - it should be labeled CASH #. It has to have a cashier signed on to ring a sale. Most owners forget that, because the same cashier stays signed in all the time, and nobody uses the button. If I'm right, all you have to do is this (in REG mode):
[CL] 1 [CASH #]
and start ringing your sale. The CL was to clear the error condition, if it was in one. 1 CASH # assigned Cashier #1 to the register.
The reason the register has the button is so it can track sales totals for each employee or shift. The register can be programed to stick with one cashier until another is signed on, or it can force you to sign on for every sale. At the end of the day it can print the normal Z totals by touching the CA/AT key, and touching the CASH# key gives totals for each cashier, I think.
Initializing the register cleared the cashier assignment and got you into the predicament. Touching the CASH # key twice will also clear the cashier assignment, as will resetting the Cashier totals with a Z reading. In any of those cases, just go back to REG and touch 1 CASH# again (or a different number if you want to sign on a different cashier).

Please refer to your owners manual.