Question about Whirlpool WFW9200S Front Load Washer

1 Answer

Washer will not drain and is making a louder than normal sound

I ran my washer with a rug in it. it seemed to get off balance and flashed some P message. I was able to get it restarted without the rug,m but left in a few rags. This morning, it was again flashing P somethign and I cannot open the door becasue i can see teh water standing in it. When I put it on drain and rinse, it makes a different sound than I have ever heard and just sits there until the message flashes back on....

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

The pump or the filter is blocked u need to pull the machine out put the waste hose into a bucket to emptey if the water come out quick then the pump is blocked if water comes out very slow u have blockage and need to remove the pump and sump hose

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The washing machine will start turn a few times add some water but then stops and the light flashes


Sounds like unbalanced now - try to rebalance the adjustable knobs under the washer - we have to rebalance every few months because our floor isn't the straightest. We always know when its time because the washer won't work right.

Mar 23, 2014 | Amana NFW7300WW Washer

1 Answer

Throw rugs are dripping wet after washing. My washer doesn't have just a spin cycle, so I have to rinse and spin. This still doesn't help. Every rug I wash comes out dripping.


The washer is likely detecting an off balance load with only a rug or two. You may want to try and put more rugs or old towles in to offer a counter balance to alleviate off balance condition. Or, you may consider washing the rugs at a commercial facility. They really are hard on the residential machines, especially if they come apart or the backing comes off.

Jan 12, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a Maytag Quiet Series 200. In the beginning of the cycle, it makes a weird 'whirrrring' noise that goes away right after the first wash cycle. It's getting water. It's very noticable and I worry...


I have a quiet series 300 and it does that, too. I think it just balances the load before washing and is normal. I found this in the manual:
Normal Sounds
Your new washer may make sounds your old one didn

Sep 05, 2010 | Washing Machines

1 Answer

Frigidaire dishwasher noticeably louder - circulation motor?


Try to position the machine, so that you can run the cycle and watch the dish washer. Remove the back panel and hear the sound of origination. Take suitable action as per your convenience. You can clean & replace the bearings if they are worn or replace as a whole unit.

Jul 06, 2010 | Frigidaire Dishwashers

1 Answer

Calypso washer is not completeing "normal" was cycle


could be or you may have a problem with the lid switch ( Ld )

Aug 23, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

WASHED RUG IN MY NEPTUNE WASHER. rUG CAME APART. washer won't drain all the way. ND COMES UP.RUG WAS SHAG TYPE.hELP!


You will have to clean up drain system in washer. Get the rug pars out. A wet vac is a useful tool here.

May 05, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Kenmore@Heavy Duty Washer - 70 Series


ck lid switch ..rug may have gotten off balance first spin and broken lid switch

Aug 28, 2008 | Washing Machines

1 Answer

Loud banging during spin cycle


please balance your washer and use smaller loads

Mar 18, 2008 | Kenmore 43052 Front Load Washer

3 Answers

Water in Outer Tub


My washer does this too and I called Maytag and was told it was normal. I don't like that answer, though.

Mar 06, 2007 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Whirlpool WFW9200S Front Load Washer Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...