When i ready to take a snap on the LCD display it

Manual display info on page 80 http://service.us.panasonic.com/OPERMANPDF/DMCTZ2.PDF

I have one of these and it cut on but nothing show up on screen and light is good

We have exactly the same problem as dmlauder! (posted 6th September)
What does the square symbol mean?? We have to keep resetting the outdoor heating unit...it works for a few minutes then stops
cate

Hi,
I believe its a heat temperature control problem showing in your dryer. Download user manual and look for Information Codes in Troubleshooting page.
Visit this link to download the user manual for Samsung DV306LGW Dryer

Good Luck and have a nice day
Rating the solution is highly appreciated.

Can you more clearly what you mean "while taking photo"?If lcd not display image...is that any text or symbol in the lcd?If you can still see the symbol or text in the lcd, I think you have trouble in your lens or ccd.
Trouble in the lens usually make the lcd display white screen. And, if ccd trouble the lcd display white horisontal line and if so hard broken the lcd display black screen, but the symbol or text is shown.

Power on, press the start button for 5 or 6 seconds, the sign will go off. Try the door gently. Means the machine is locked, for children. I think if you do it again it locks.

Pl rate me 'very helpful' for the free help, thanks

By now this may be a mute point given the time differential ....however;.
if the machine is saying"please call service" do the following..
Press Prog,*,6 ..then press the right arrow key until "service call" appears in the lcd then press ENTER.
aAt this time the display will show the error...favorite was "heater error"
Press STOP to exit.
**If heater error is displayed,you will need a service man to replace the fusing unit in the machine.

I work on these cameras all the time you have a ccd going out or has gone out that is causing the auto sensing feature to now work their for the camera stops working. 1 other thing it might be could be the main-board but they don't go out as often.

What SC code is the machine giving? Watch the LCD display and the machine will give an SC Code. Let us know this and we may be help to further.

You can open it when remove all screws at the back, from the stand also (under the TV).
Then carefully remove the snap-in shell ( front and back). TV is one compact part and plastic shell is snapping ( front and back) + stand, on the screws.