Question about Brother Sewing Machines

1 Answer

I have a Consew model 226 bobbin lever that will not lay down.

I have a Consew model 226 industrial straightstitch machine. Whe I removed the bobbin after raising the retaining lever it will not lower back into place. It is not damaged in any way. Could thread be wrapped around under the bobbin carrier causing this? How should I clear this problem? Is it difficult or unadvisable to remove the bobbin mechanism to clear thread under it or can it be done by myself. I just need a detailed diagram or breakdown so I can reassemble this piece correctly. I am pretty good at mechanical stuff like this but I will defer to the experts.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Have you tried raising the foot with your knee lift and at the same time by hand lower the retaining lever. Always works for me.

Posted on Aug 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Consew 226 sewing machine will not feed the material through under the needle


The walking foot lever is not touching the material . is the knee pedal adjusted right . is the manul lever on the back down.

May 11, 2014 | Consew 226R-1

1 Answer

Consew 226 how to raise the walker


There's a wing nut behind the machine, loosen the wing nut and slide it lever up to adjust it higher or down for lower..

Jan 14, 2014 | Consew Sewing Machines

1 Answer

Need help finding bobbin case for consew industrial sewing machine


AmApparelSupply.com
consew.com
sewman.com
allbrands.com

May 29, 2012 | Consew Sewing Machines

1 Answer

Cannot find a bobbin case for my consew industrial sewing machine


AmApparelSupply.com
consew.com
sewingmachineoutlet.com
industrialsewmachine.com
sewingindustrialmachines.com
sewingmachinesplus.com
sewman.com

May 29, 2012 | Consew 339RB-3 Sewing Machine

2 Answers

Threading a consew RB-1 sewing machine


There are a few Consew models listed here http://www.sewusa.com/Sewing_Machine_Threading_Diagrams.htm maybe one will be similar enough to help you with the threading of your machine.

Apr 19, 2010 | Consew 206RB

1 Answer

Consew 230 machine, how to dis engage needle to wind bobbin.


I have an old Consew 230B and need an operating manual can any one help me. Thank you

Mar 19, 2010 | Consew Sewing Machines

1 Answer

I have a consew machine 226 and the needle thread will not pick up the bobbin thread .


your needle is in backward, the groove must point to the left.

Dec 30, 2009 | Consew 226R-1

1 Answer

I recently moved and can't find the belt to my Consew 226. Having problems finding a replacement. Can you help!


Go to www.consew.com and download the parts list for the 224 Consew. It's the same as the 226 for parts. Or, go to www.diamondneedle.com. They have nearly every part you're likely to need. I got bobbin case screws, a hook, some metal reusable bobbins, and some needles, all at very reasonable prices.

Oct 16, 2009 | Consew 226R-1

2 Answers

Consew 226 r sewing machine


do you have the user manual?

Sep 15, 2008 | Consew 206RB

1 Answer

Threading & bobbin won't pick up


Make sure the needle is inserted all the way in with the long groove to the left.
Threading is through 1)the thread guide 2)The tension 3)The take up lever 4) The needle eye (left to right).

Remove the needle plate, thread the machine. Turn the hand wheel and watch the thread in the needle to see if it is above the eye of the needle. If it is, the machine needs to be retimed.

Sewman7

Apr 27, 2008 | Consew 1118-3

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1128 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...