Hi this most honda engines dont have a mixture adjustment screw they only have a air bleed adjusment on the front of the carby close to the head though you can only move it a bit either way on some others should be about 2 turns out from closed, the main problem that honda engines have is they will still run with water in the carby , I would try cleaning out the carby bowl first its only held on with a bolt in the centre.
I am looking for the pin out numbers on the OXO wire feed? Model P-22 serial Number 800512 to hook...
(More)
I am looking for the pin out numbers on the OXO wire feed? Model P-22 serial Number 800512 to hook it up to a Pow-con welding machine.
I have an Agri-Fab Broadcast Spreader 100. The kind that is pulled behind an ATV or riding mower. ...
(More)
I have an Agri-Fab Broadcast Spreader 100. The kind that is pulled behind an ATV or riding mower. Somehow, I have lost the rod that connects the adjustment lever to the chute opening in the bottom of the seed bin. I would like to know if there is a parts sheet for this spreader available and if I can order this part's replacemnt from you or the manufacturer?
Thanks, Mike
Hello, I have a Troy Bilt 2410 SnowBlower that has been used for one season and will not start. I'm...
(More)
Hello, I have a Troy Bilt 2410 SnowBlower that has been used for one season and will not start. I'm not sure if anyone knows much about these. Such as do they have a knob to shut off gas flow and how I can tell if the spark plug needs to be replaced. Also if I was to drain the gas is there a plug underneath. The Troy Bilt manual really does not give a whole lot of info. Any suggestions would be greatly appreciated or sites that have more info. The other thing is that someone mentioned spraying with starter fluid. On my lawn mower it's right on the air filter but I'm sure about where to spray the snow blower. Thanks,