Tv will not click for pic to show, bulb good, just blicks green

Dear
There may be some error related to fuser or LSU.
Pl. down load samsung easy printer manager from samsung site or it can found on the disk provided.
run it it show the error detail.
Thanks

Count the number times the red light blinks this is an indication of the error code as to what the probem is, if it blinks 10 times then this is a power supply failure.

Change the bulb on the passenger rear.

3 times standby red light blinking shows that lamp cover has not been placed back properly after lamp replacement.
Make sure lamp cover, (the first thing that you removed to replace lamp in tv) is fixed securely then turn tv On.

it is going in safeguard mode there is some problem in circuit

it will need a new light board or you will need to turn the brightnees up

The camera turns on and there is a green light on the camera and instantly turns red

Try to use the KODAK Lithium Digital Camera Battery CRV3 There is a red light because the camera has insufficient power and also the lens assembly might be defective try to use the battery i recommend

Sound like the TV is in protection mode. This happens when a part goes bad inside. the TV turns OFF to protect the other parts from being damaged.
Most commonly it's a power supply related issue. A bad capacitor or transformer on the power supply board is to blame.
For a do-it-yourself fixer with electronic experience, a Service Manual is the best for trouble shooting the problem down to the bad part. Normally, you can find it over the internet for less than $20.

Your TV is in fault protection. Due to blows caps on the PSB-power supply board.

Best Regards and Semper Fi

THE BLICK IS A CODE IF IT BLICK 2 AND PAUSE MEED NO WARER OR THE ICE MACKE MODLE IS AD IF IT BLICKS 3 PAUSE THE TRANMITER IS BAD.