When I replace the batteries in my mouse # 26751, the lights blink on the mouse, but the arrow won't move on the screen.

Battery issue

Plug in the reciever into the computer and make sure the mouse has fresh batteries. Once you are in Windows, press the link button on the receiver. The indicator light should start blinking. Then within two seconds press the link button on the bottom of the mouse, the indicator light should quit blinking. After re-linking the devices move the mouse to see if it moves the cursor. If the cursor does not move, then move the mouse and see if the indicator light on the receiver blinks. If the device does not blink then try re-linking the devices again.

Reboot the computer and allow it to detect the mouse.

disconnect the usb adapter from the system connect it again mean while remove the mouse batteries re insert or better change batteries then perform the step that you ahve already tried

I had the same problem, brand new battery, the indicator light still blinking red. I finally got mad enough to shake the mouse kinda hard, and it worked. I then removed and replaced the old batteries in, it started blinking red again, but it worked after I gave it a couple of hard side by side shake. I do notice that there's something moving inside the mouse. It could be a connector that got loose. Hope this fixes your problem

buy one of the original for it,then it will work.

ODEL 96147 , PROBLEM":LIGHT FLASHES ON MOUSE ONLY. tHE SMALL DEVICE INSTERTED DOES NOT FLASH. AND THE MOUSE ARROW DOES NOT MOVE AROUND SCREE

install proer driver for your mouc
se

Press the link button on the receiver the indicator light should start blinking. Then within two seconds press the link button on the bottom of the mouse, the indicator light should quit blinking. After re-linking the devices move the mouse to see if it moves the cursor. If the cursor does not move, then move the mouse and see if the indicator light on the receiver blinks. If the device does not blink then try re-linking the devices again.