Question about GE Kitchen Ranges

Open Question

I have a GE Spectra. Oven wouldn't turn on, but when I turned on a burner oven would turn on for about 2 minutes then shut down whole stove. Burners come on for about 2 minutes too but do not heat up.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
fridgetech
  • 473 Answers

SOURCE: ge spectra xl44 stove

Most likely the oven ignitor is bad or weak.  You can look at it and see how it compares to the broil ignitor.  If you see a whitish color on the ignitor and if it doesn't fully glow then it needs to be replaced. 

Posted on Oct 22, 2007

Ad
  • 23 Answers

SOURCE: GE Spectra range

All of the items you mention that do work, are 120 volt items.
All the items that do NOT work are 220 volt items.
Sounds like you have a voltage problem, you will need to use a meter to check if you have 220 volts a/c to the outlet the stove plugs into. Take care when doing the following, you will be around live voltage and could get hurt. If you are uncomfortable working with a live circuit best to call someone in to do it for you. Check for 220v at the outlet for the stove (where the stove plugs into), if you have it there, go to where the cord attaches to the stove and check at that point. You should have either a 3 or 4 wire cord on the stove, On the rear of the stove there is a terminal block that the cord is fastened to. Between RED and BLACK you should have 220v, between RED and WHITE and BLACK and WHITE you should see 120v. Another thing to check is that the nuts holding the wires from the cord to the terminal block on the stove are turned down tight. A loose connection there will give you the same problem you have as well.

Posted on Feb 19, 2008

  • 1314 Answers

SOURCE: GAS STOVE

yep replace the bottom ignightor take out the rackes remove the two bott screws in the oven remove the bottom plate and just keep going down

Posted on May 21, 2008

rickzilla
  • 706 Answers

SOURCE: ge spectra gas stove top not lighting

If your top burners are not lighting or will not work, it is possible that the burners have become dirty or wet. Please follow the troubleshooting directions below before calling service:

  1. Turn you burner to the Lite position:

    If you hear clicking or sparking, go to Step 2.

    If you do not, check your circuit breakers. If the circuit breaker is ok, we recommend that you schedule service by calling 1-800-432-2737 or schedule service online.

  2. Clean the burner and electrode:

    First remove the burner grate, cap, and head. Use a needle or paper clip to poke through the holes on the burner head. Re-assemble and try the burner.

    Remove the burner grate, cap, and head. Even if it looks clean, wipe the tip of the electrode with a clean, dry paper towel and PRESS IT DOWN. Re-assemble and try the burner, again.

    Check to see if the burner works, If not, then go to Step 3.

  3. Re-assemble - Make sure that each burner top matches its burner bottom. The burner top will lay flat if put on correctly.

    Check to see if the burner works, If not, then go to Step 4.

  4. The spark igniter is operating properly, but the burner is still not lighting. At this point, we would recommend that you schedule service by calling 1-800-432-2737 or schedule service online.

Posted on Sep 01, 2008

  • 2 Answers

SOURCE: GE spectra xl44 - Oven not working, broiler & stove-top burners fine

replace the ignitor for the oven. it's the lower one and not the one on top.

Posted on Nov 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas stove oven wont turn on


Put a new iginiter for the oven on your stove.

Mar 03, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Ge spectra gas oven, stove works, but oven does not


the ignitor is bad. replace the ignitor and it will work perfect.

Feb 13, 2009 | GE Profile Spectra JGBP79 Gas Kitchen...

1 Answer

GE Spectra TrueTemp Oven Pilot is Out


REmove bottom panel from stove. shut gas off for at LEAST 5 min. Longer is better. Then placel open flame above gas nozzle, slowly turn to ignite posiiton. After it is lit, wait 30 seconds and turn to on positon.
If by chance this model doens't have a knob for this, then turn gas valve off for 5 min, let fumes evaporate, light flame, place over nozzle, turn gas on.replace bottom oven panel slowly.

Jan 18, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Top burners and oven don't heat up enough-GE Spectra


the stove it's only getting 110 volts, that's what happen when it does not get enught power.

Dec 03, 2008 | GE Spectra JBP78 Electric Kitchen Range

1 Answer

GE spectra xl44 - Oven not working, broiler & stove-top burners fine


replace the ignitor for the oven. it's the lower one and not the one on top.

Oct 28, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

3 Answers

Ge spectra gas stove top not lighting


If your top burners are not lighting or will not work, it is possible that the burners have become dirty or wet. Please follow the troubleshooting directions below before calling service:
  1. Turn you burner to the Lite position:

    If you hear clicking or sparking, go to Step 2.

    If you do not, check your circuit breakers. If the circuit breaker is ok, we recommend that you schedule service by calling 1-800-432-2737 or schedule service online.

  2. Clean the burner and electrode:

    First remove the burner grate, cap, and head. Use a needle or paper clip to poke through the holes on the burner head. Re-assemble and try the burner.

    Remove the burner grate, cap, and head. Even if it looks clean, wipe the tip of the electrode with a clean, dry paper towel and PRESS IT DOWN. Re-assemble and try the burner, again.

    Check to see if the burner works, If not, then go to Step 3.

  3. Re-assemble - Make sure that each burner top matches its burner bottom. The burner top will lay flat if put on correctly.

    Check to see if the burner works, If not, then go to Step 4.

  4. The spark igniter is operating properly, but the burner is still not lighting. At this point, we would recommend that you schedule service by calling 1-800-432-2737 or schedule service online.

Aug 15, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GAS STOVE


yep replace the bottom ignightor take out the rackes remove the two bott screws in the oven remove the bottom plate and just keep going down

May 21, 2008 | Kitchen Ranges

1 Answer

Ge spectra gas stove top not lighting


no gas flow sounds like a bad gas regulato on the stove. as for the 5 year old ge profile with ignitors not working, you need a part called a spark modual

Nov 16, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

172 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...