Question about GE WJSR4160DWW Top Load Washer

2 Answers

While i'm washing water is getting on my floor, I don't know if it is when spinning or washing what could be the problem?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I had this same problem. The clamp on the discharge of the pump needs tho be replaced. The fac clamp is a wire spring loaded type, you need a good old clamp you can tighten with a screwdriver.

Posted on Sep 21, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 560 Answers

Help me help you...Dry the floor...Set the load size to small. Let it fill and start the wash cycle. Stop the unit. Look underneath it. Is there water on the floor? If so let me know. If not, start it up again and let it complete the wash cycle. As it begins to drain, look for water on the floor. Let me know.
I am trying to help you eliminate (or isolate) a bad tub seal, centrifigual force out, or a drain pump issue. When the water actually begins to leak is the key element we need to know in order to solve your problem. :) 2CR

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing machine don't makes the spin dryer at the end of washing cycle


This video will show you how to change the pump washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Feb 21, 2013 | Bosch Washing Machines

1 Answer

Hot water stops filling too soon.


Fill setting has to be adjusted and the belt is slipping on the spin cycle and not generating enough centrifugal force to get the water out.

Aug 25, 2017 | Kenmore 22422 Top Load Washer

1 Answer

Fridgedare front end washer! Water don't seem to drain for washer, looks like the spin cycle do not spin water out.


if you can hear pump motor, then there is a blockage somewere, check see if filter is clear,check outlet pipe is not kinked,disconect outlet pipe hold over pan as close to floor as posible see if water comes out if it does then there is a problem with pump.

Aug 12, 2011 | Washing Machines

1 Answer

I have a fisher paykel eco which is spining water on the floor.


You could take the pump out and check it for obstacles

Mar 05, 2010 | Washing Machines

1 Answer

Crosley CW6000 Washing Machine. When my washing machine is in the spin cycle, it shakes severely and the machine on the floor


My Crosley Cw6000 wash will not spin the water out, I lift the lid to watch the spin cycle, it spins but the water does not drain..

Sep 02, 2009 | Crosley CW6000 Front Load Washer

1 Answer

Water on floor; small amount to begin with..15 loads ago?, now lots of water (1+ gallon) and black grease on floor. slow spin, noisy and hard to get spinning.


if this machine is an older model, it may not be worth the effort to get it repaired. This sounds like the transmission and spin tube are on the way out, and there is some seeping around those seals. The transmission is probably leaking and will soon fail.

Aug 31, 2009 | Washing Machines

1 Answer

Hotpoint aquarius wma58 1400. Full of washinh. Full of water.


pull your washer out. put near door if poss then put the waste pipe down to floor level to empty the water. if there is to much water in the drum it will not spin try your pump

Jun 21, 2009 | Washing Machines

2 Answers

Machine stops in Rinse & Spin Cycle & leaks water


Hotpoint WF430 Front Load Washer This video will show you how to find that leak on any front loading washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

May 24, 2007 | Hotpoint WF430 Front Load Washer

Not finding what you are looking for?
GE WJSR4160DWW Top Load Washer Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...