Question about RCA RCR350 Remote Control

1 Answer

I dont know how to set up this remote to control my tv. My tv has no menu button and it doesnt have a remote. can you help?

Posted by on

  • jennerina
    jennerina May 11, 2010

    Does the tv have a remote sensor? (has it ever had a remote?) The menu button on the tv isn't important. Only that it has a remote sensor, for the remote to be used. If the tv does have a sensor, then all the programming will be from the remote. Hope this helps. Good luck!

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I can't get the code in for my tv tray it would take it

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have aa Lc19DV220 sharp tv i need to access the menu so i can get the channels but i have a universal remote how can i get to the menu on my tv if it doesnt have a menu button.


To select its inputs, you should have its original remote control. To buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
http://electrohelponline.blogspot.com/

Feb 01, 2016 | Sharp Televison & Video

1 Answer

I accidentalty locked my tv and dont know how to do it and i dont have the right controll for it.


Hello
To unlock RCA tv, you must have its original remote control. If you haven't, just try to borrow from any of your friends or relatives who owns RCA tv of your model, for just to unlock it.

One amoung the following process will unlock your RCA tv.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
  4. Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.

Mar 15, 2011 | RCA 32F531T 32" TV

1 Answer

Captions are on ther tv and i cant get into the menu. A message keeps popping up saying blog. fpa escend and i dont know what to do please help


Hello
Just reset your RCA tv by the following method. After reset you have to enter a new parential code and proceed.


Most RCA sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the [0] button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
  4. Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
OK.













Feb 23, 2011 | RCA TruFlat 27F520T 27" TV

1 Answer

My tv got locked by parental control.. I dont know what to do please helpme


Hello

Just try the following. One amoung these process will surely unlock your TV. After unloking you have to reset the V-Chip.

Most RCA and GE TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
  4. Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
OK

Dec 21, 2010 | RCA 24V510T 24" TV

1 Answer

My tv says locked on the screen. i dont know what to do with the rmote. it will turn on and the channels will go up and down but says locked on the screen


Hello
As you have its remote things are easy. If you have forgotten the passoword do the following.

make sure the TV is off. Simoultaneously press and HOLD VOL. Enter a next password next time you access parential control menu.

If this does not help do the following

[1] Hold dow n [0] on the remote control and volume [2] Hod down Menu button on the front panel of the TV and 'TV' button on the remote control at the same time for at least 5 seconds.
[3] Hold down "Go Back" on the remote control hanset and "Menu" on the front of the TV at the same time for at least 5 seconds.
[4] Hold down "Eject" on the front of the TV and the "Menu" button on the remote control hanset at the same time at least 5 seconds.
Depending on the model one amoung these steps will unlock RCA tv. OK.

Nov 13, 2010 | RCA 32F531T 32" TV

2 Answers

Rc23


Push the MENU button on the remote, then complete the following steps: Parental, Fav's & Setup> System Setup > Remote > Program Remote. From here just follow the on screen instuctions. Good Luck!

Oct 26, 2008 | Directv RC23 Remote Control

2 Answers

PX- rc1


Basically all it takes to restore the TV to factory setting is to unplug the TV from power and all connecting cables for about 3-5 hours (depending upon your model). This is called a Hard Reset and should restore the TV back to factory defaults.

Oct 23, 2008 | Televison & Video

1 Answer

How to reset parental controls


Most RCA and GE TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it’s self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
  4. Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.

Apr 29, 2008 | RCA 27V530T 27" TV

1 Answer

Dish network


Codes for Apex are 595, 618, 743, 744, 005, 006, 019, 020, 120, 745, and 757.

Codes for Sony tv are 500, 514, 578, 640, 670, 690, and 758.


If these dont work here is what is called a power scan. It will go through all the codes in the remote and find the right code for your tv.


1)hold down tv button next to sat button in top left corner
2) when all buttons illuminate press 500 into remote
3)press pound sign
4)Hello, please help..
5)hold town tv button again.
6)when all buttons illuminate press big red power button
7)press up arrow once a second until tv shuts off
8)press # pound sign
9)try to turn tv back on w/ big red power button
10)if tv doesnt turn back on try again from step 2 but use down arrow instead

To set up caller id you have to enable it on the receiver. Press menu 6-1-2, highlight enable and press select. Highlight done and press select. Press 0 three times. Try calling yourself with a cell phone to see if it works, if not, repost on this thread.

Dec 11, 2007 | DISH Network IR Remote Control

1 Answer

LG TV 60"


It sounds like you pulled a wire from the tv if thats what u were doing by adjusting it. Check your cables on the especially the RCA cables there is a red,whit, and yellow wire if you did accidently pull one out it would be the yellow one if ou have no picture because the red and white are for sound check all ires on the back. Also if you think you did it by the remote hit your tv input button or go to menu for the tv and change your setting like tv1, tv2, av,1 etc that may help if the wire check doesnt.

please rate

Dec 06, 2007 | RCA DIRECTV Satellite Remote Control

Not finding what you are looking for?
RCA RCR350 Remote Control Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...