Question about Televison & Video

1 Answer

Mitsibushi tv model#VS60609

The front key pad has been locked and the tv was turned off and we don't have a remote is there anyway to reset?

Posted by on

  • 1 more comment 
  • tony01 Nov 24, 2007

    My kids were messing with the front buttons got into the menu and the next thing I saw it was locked and couldn't do anything then stupid me I thought by turning it off might reset it but know I can't do anything.

  • tony01 Nov 24, 2007

    I tried it but no it still wont come on.

  • tony01 Nov 25, 2007

    Thanks I figured I would have to buy a remote.Thanks again

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 934 Answers

How did you think you locked the keypad on a VS60609??

Posted on Nov 24, 2007

  • 1 more comment 
  • William Rayburn
    William Rayburn Nov 24, 2007

    Try unplugging it for about 15 minutes and see if that will reset it.. If not let me know we'll try something else...

    Bill

  • William Rayburn
    William Rayburn Nov 24, 2007

    There is no other locks that I'm aware of or that are listed in the owner's or service manual other than Parental Control... It's a longshot but maybe they set the timing mode which restricts the unit from any channels all the time and somehow it just won't come on... Only way to reset P/C is by pressing the number 9 and QV on the remote at the same time. Unfortunately you don't have the remote so you have one of two options - - (1) buy the original remote or (2) get a miracle remote for a fraction of the cost... http://www.miracleremote.com/



    I have both the service and owner's manual and I'd be glad to send them to you - - just send me an email privately and let me know what it is you need... I get more than 3000 emails a day and it's hard to remember what goes with what... :)

    Bill

  • William Rayburn
    William Rayburn Nov 25, 2007

    Seriously, take a look at those miracle remotes.. We have almost every brand here in the shop and they all access EVERY feature of the original, including the service menus.

    Bill

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to turn my smart tv on manually or with remote.


Lots newer sets have hidden menus and resets. Contact Vizio for reset on the set.

Aug 25, 2017 | Televison & Video

1 Answer

Child lock and the remote wont work on it i tried other tcl remotes and it the same thing the buttons on the tv dont work either when press it says key lock help me out plzz


Can the tv be reset to factory default , if it can this should undo the parental lock.
If not, contact a repairman who has experience of your make. I had a forgotten password on a technomate satellite receiver and the technician told me that the model I had was installed with ageneric code in case the user set code was forgotten.
Anyway, reset if you can and ask a tv technician if you cannot
good luck

Jun 23, 2015 | Televison & Video

1 Answer

I accidentally turned on the fpa lock and don't have a remote. What now?? Any hope? I also could not get the CC up before I got locked out.


Hello
To turn out FPA lock with RCA TV, you must have its original remote control handset. If you haven't one, just buy a new one of borrow it from your friends or relatives, who own the same model of RCA TV. After unlock, you can use any other remote control. If you are using the original remote control, do the following to unlock it.

Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
OK.

Sep 01, 2011 | RCA TruFlat 27F520T 27" TV

1 Answer

Locked key pad


The procedure to unlock the key pad is to hold down the MENU button for 15 seconds. If that doesn't do it you have a problem.

Dec 29, 2008 | Mitsubishi VS-50607 50" Rear Projection...

2 Answers

Model WS 73713, mitsibushi big screen TV. green blinking light on front panel doesn't stop blinking and tv will not turn on by remote or power button on panel


called a TV repairman. I know $65. to start service call but feel it will be fixed correctly in a timely manner.

Sep 08, 2008 | Televison & Video

1 Answer

TV RESET


I found the right manual on the tv and reset the lock code i forgot thanks anyway

May 28, 2008 | RCA HD65W140 65" Rear Projection...

5 Answers

Unlock Hyundai TV


motimoti 's solution worked. Thanks.

By the way, how do you find the solution ?

Apr 21, 2008 | Televison & Video

2 Answers

LOCKED HITACHI TV


need model and chassis number and I' may help you email me

Mar 20, 2008 | Hitachi C21RF39 21" TV

2 Answers

Magnavox 27MS343S 27" TV


You will for sure need to borrow a remote from someone to do this. But I will give you the way to unlockit just in case you can get one. Philips sets use a four digit code to control the v-chip. The override code for Philip sets is 0711, although it may say "Incorrect code" the first time to trick you. If "Incorrect code" is displayed, simply enter 0711 again. To use it hit the MENU key to get to the menus. Go up or down until you reach AUTOLOCK or SMARTLOCK, depending on the model, and push the "right arrow" key on the remote. Enter the override code, and enter it a second time if it says it is incorrect. Once in the AUTOLOCK or SMARTLOCK menu, go to BLOCK, and push the "right arrow" key. Go to BLOCKING OPTIONS and press the "right arrow" key. Go to MASTER DISABLE and press the "right arrow" key so that it says "MASTER DISABLE ON". The v-chip is now reset. Good Luck

Aug 30, 2007 | Philips Magnavox 27MS343S 27" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5339 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...