Question about Epson Aculaser C1100 Printer

2 Answers

Remove all toner cartridges

I am going to replace my existing C1100 with a new one which will be supplied without toner cartridges. How do I remove all the existing cartridges which have a lot of toner in them to be able to put them in the new printer?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It took me some time but I found the sollution:

Remove the powercord from the printer.

Open the front door and remove the first toner.

Close the front door and open the top door, remove the photo conductor.
When the front door is closed, you can turn the toner trommel and move it so that the second toner gets in the remove position.

Open the front door and remove the toner.

Close the front door and turn the trommel.

Repeat those steps until all are removed.

Posted on Aug 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 724 Answers

Same model unit read the owners manual to install thenreversit to remove it fro the old one... If not the same model well good luck they are different

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The black toner needs replacing but I can't get to it. The Cyan toner is at the front and I can't move it round to get to the black! It's an Epson Aculaser C1100


there maybe a cartridge replacement button to drag the print head etc out of the way so you can get at the cartridges.


I hope this was helpful

Jan 11, 2011 | Epson Aculaser C1100 Printer

1 Answer

How exchange cartridge for Epson C1100


Make sure that Ready or Sleep is displayed in the LCD panel.
Select Change Toner X (The letters C, M, Y, or K appear in place of X, indicating the colors Cyan, Magenta, Yellow, and Black.) in the Reset Menu on the control panel.While the cartridge X you selected above moves to the cartridge replacement position, Please Wait appears on the LCD panel.Replace Toner X appears in the LCD panel when the cartridge to be replaced reaches the cartridge replacement position.Then Open Cover A.Push up the right lever to unlock the toner cartridge. Then remove the toner cartridge from the printer.

May 15, 2010 | Epson Aculaser C1100 Printer

1 Answer

I have to uninstall my toner cartridges in my epson c1100, to install in my new printer. i cannot get my old printer to uninstall the toner


if you are installing a new printer, you should not need to remove the toner cartridge from the old one. If however you are trying to replace the toner cartridge, when you open the device, there should be a off color button you press to release the cartridge from it's position so you can remove it.


Jun 21, 2009 | Epson Office Equipment & Supplies

1 Answer

Cannot take out the ink cartridge out of the epson aculaser C1100


You must follow these steps to replace the toner cartridges:
  1. Turn the printer on.

    getimage.ashx?id=912&w=
  2. Open Cover A.

    getimage.ashx?id=913&w=
  3. Push up the right lever to unlock the toner cartridge.

    getimage.ashx?id=914&w=
  4. Remove the toner cartridge from the printer.

    getimage.ashx?id=915&w=
  5. Take the new toner cartridge out of its package and gently shake the toner cartridge as shown below.

    getimage.ashx?id=916&w=
  6. Hold the tag and gently pull the toner seal upward and remove it.

    getimage.ashx?id=917&w=
  7. Insert the cartridge all the way until it stops securely with the arrow mark on the top of the toner cartridge facing toward cover A.

    getimage.ashx?id=918&w=

    TIP: Hold the cartridge in the middle as shown in the picture. Push it gently all the way through the rails. Make sure both sides of the cartridge are inserted at the same time. Keeping some pressure in the middle of cartridge until you hear a ‘click’.
  8. Push down the right lever to lock the toner cartridge.

    getimage.ashx?id=919&w=
  9. Close Cover A

Apr 02, 2009 | Epson Aculaser C1100 Printer

1 Answer

How to change the balck toner only in the epsom aculator c1100 showing K toner low, but blue at the place the black should be?


Epson C1100's show toner low for a long time before it actually needs replacing (usually have another 500 - 1000 copies left). This is to give you time to order a new one. When it is completely empty you will get a message saying replace K toner and the cartridge will be moved into the front position ready to remove it. If you really must replace it before it is empty let me know and I will try to explain how to do it, although it is quite involved.

Please take a moment to rate this solution. Thanks.

Mar 03, 2009 | Epson Aculaser C1100 Printer

3 Answers

Replace toner problem


To replace the cartridges before they are actually empty you should:
  1. Navigate to the reset menu (using down arrow)
  2. Select this (right arrow)
  3. Navigate till you get to Change Toner x (where x is the colour)
  4. Select this.
  5. Wait for the printer to stop churning.
  6. Open the front door and you should see the correct toner cartridge at the back.
  7. Follow the instructions just inside the door (or on the cartridge box.)

Feb 16, 2009 | Epson Aculaser C1100 Printer

2 Answers

How to install toner chip on epson c1100


The toner chip is situated on the end of the toner cartidge - it's a circle, about 1.5cm in diameter.
They may have given you a new housing, in case you damage the one currently on your toner, when you try to remove it.

Nov 15, 2008 | Epson Aculaser C1100 Printer

1 Answer

Epson Aculaser C1100 erro message install C tnrcart


You need to remove the cyan cartridge, and thoroughly clean the inside of the printer (please use proper printer cleaning kit, not a damp cloth!). The sensors can get crudded up with loose toner inside the machine.


Oct 28, 2008 | Epson Aculaser C1100 Printer

2 Answers

Black Toner replaced


Replace Toner with gen cartridge.

 

Or Take cartridge back as faulty after checking that it was opened and installed correctly.

 

Check display on printer for indications that maybe it needs one of the 3 colour toners indicators are Y,C or M

 

K is black

Oct 20, 2007 | Epson Aculaser C1100 Printer

3 Answers

Epson c1100


Yes, they do make this model, I'm using one now. I had the same problem

The solution for me was to clean inside of printer thoroughly, with the C (or whatever) cartridge removed. The sensors get dirty.



Sep 04, 2007 | Epson Aculaser C1100 Printer

Not finding what you are looking for?
Epson Aculaser C1100 Printer Logo

Related Topics:

585 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...