At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
How many times this standby/power light
blinks at one time Count it
carefully. These blinks are fault
indication, and known as blinking codes.
From the number of blinks occur at one time switch ON; you can get an
idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the
link http://electronicshelponline.blogspot.com/
Check your source input toggle the source or video **** on the remote and make sure your on the correct virtual input. Also check your cables on both end to ensure they are not loose. lastly i would also try other inputs for instance if your running hdmi try a composite cable it may be just one input affected.
The ProScan will accept input on input 90/91/92 using the connectors on the backside. You can use S-video[the little round black connector] or the composite video [yellow connector] for the video in and use the red / white pair for audio in. 90 selects S-video and audio 1 in 91 selects composite and audio 1 in 92 selects composite in 2 and audio 2 in Connect these cords to the S-video or composite yellow output, and the Red-right White- left audio outputs on the DVD. If you don't want to do this, get a RF modulator ~$15, and connect the yellow/red/white from the DVD output to the inputs on the modulator, and then connect the RF [cable] output of the modulator to the antenna input on the ProScan, and tune channel 3 or 4. tom
You can tune to 90 for input 1 S-video, 91 for input 1 composite and 92 for input 2 composite only. Most RCA and GE brand replacement remotes will work using code 000, or 001. I use code 237 for my 5 in 1 remote and can get PIP and the setup displays to work. tom
Proscan is owned by RCA, but they have very little support for that product any more. RCA created another company to deal with the product it is http://www.oncorpus.com/ They may have support for your TV set.
The chassis number is CTC169CG5 (This may help you find service data) since this same chassis is used in RCA models.
Any shop servicing RCAs should be able to find this chassis number and provide service to you, if RCA or Thomson Electronics is non-responsive to you.
set up channel 90 91 and 92. 90 is for S-video input, paired audio with composite video on 91. 92 is for input 2, composite and R/L audio. You need to enable them in the setup menu by manually tuning to 90/91/91 and then adding them. tom
there should be some type of input button on the remote to switch the tv from cable to composite or video 1 2 3 or 4. I'm not an expert or anything though
I want to know where is the fuses because I can't start my t.v. manual or with the control I open the back and front can see no image no contact nothing what can I do?
I think you are right about VHS up front.......One more option =
buy a seperate video input switch box..then you wouldn't need
to use front input ........T.
×