Question about Air Tools & Compressors

1 Answer

Compressor will not run error code 15 shown - Air Tools & Compressors

Posted by on

  • 1 more comment 
  • sue9950 Jul 30, 2009

    sorry for lack of info unit is ALUP SCK 31-08/so yes error 15 is shown on display

  • sue9950 Jul 30, 2009

    Thanks for info unfortunately i have already tried this with no effect

  • sue9950 Jul 30, 2009

    Thanks for help tim best regards john



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,777 Answers

What make / model compressor are we talking about here? The error code 15 is on a LCD on the unit?

Thanks, please let me know


Posted on Jul 30, 2009

  • 1 more comment 
  • Tim Grayson
    Tim Grayson Jul 30, 2009

    Well lets start with the basics, if you haven't done this already, unplug the unit, leave it unplugged from the power for a good 2 minutes at least, and then plug it back in. Does it still persist with error 15?

    Let me know, unfortunately most of the info I have on this is in German, will keep looking here.


  • Tim Grayson
    Tim Grayson Jul 30, 2009

    No problem, I figured as much, just wanted to verify. I have tried speaking with someone at ALUP but they say they need more information on the model / need to speak with the actual customer. I hate to send you their way, but give them a call at 800-528-5192 to see if they can tell you what error 15 is indicating. This is not a published number so at least know that you are getting some benefit here =).

  • Tim Grayson
    Tim Grayson Jul 30, 2009

    No problem, if it ends up fixing the issue please come back to the site and put that I answered the problem, otherwise I get no credit on here. No worries, just asking =).

    Thanks sir,




1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

When i turn on my ac it looks to be working but 10 to 15 min later no work any operation and disply shown EC.

Plz clearly check the error code. There is no EC error code. There wil be only E1, that.

May 07, 2014 | Midea Heating & Cooling


Why Is WHIRLPOOL Duet & Duet HT washing machine showing F/15 error code on...

The error F/15 is shown on the display due to Motor Control Unit (MCU) Error detected in the washing machine.
In this problem check the MCU in the washing machine. The motor is either got stuck up or got overheated and got faulty. This will Help. Good Luck.

on Mar 11, 2010 | Washing Machines

1 Answer

No heat but fan keeps running

If the air conditioner compressor runs all the time the main control board might be defective. The main control board provides the voltage to the fan motor and compressor. These boards are often misdiagnosed. Check all other components to be certain this is the cause of the problem.

Nov 25, 2013 | LG LAN186HV / LAU186HV 18,000 BTU 15 SEER...

1 Answer

Msa 1000 error code 408

Hi, a similar issue with MSA 1xxx series StorageBoxes is found in the HP - Enterprise forums 409 Storage Box 1 Power Supply Failed MSA500 G2 . The error code might not be the same but if the device is still able to boot and run, you can clear the error code by pressing the left & right simultaneously while the error message is in display. This is stated in the following picture shown below:

Alternatively, you can check the MSA 1000 error codes in the user manuals shown below:

Mar 31, 2012 | HP StorageWorks MSA1000 Network Storage...

1 Answer

I have a portable air conditioner from dimplex, dac15hc, it cools when 1st turned on then aprox 1-2 min later i hear the compressor turn off, the air coming out gets warmer until a code of ES is shown on...

E5 Outdoor activation of compressor over heatprotection or motor lock. Check fan motor mechanism is locked. Replace fan motor.If compressor getting high amps, replace running capacitor and check. If still problem, replace compressor. Thanks, helpful.

Feb 01, 2011 | Heating & Cooling

1 Answer

Our Gestetner DSM635 jams every time we try to staple copies. Researching this issue, I saw that we need to initialize the staples by going into the Tools screen. However, when I try to do this, that...

hold the power button for 15 sec. for a system reset. Try to remove each panel that opens and check for broken pieces of paper Recycle the system by reinstalling the software once again. If you getting error codes then follow this We need to clear out these error codes stored in your printer NVRAM or memory! Shut down the printer and pc associated with it. Remove data cable and reinstall the software for this printer, press and hold the power button on the printer for 15 seconds, then reconnect the printer after software installation is successful. This process will clear the error codes that you keep receiving

Jan 26, 2011 | Gestetner DSm635 Copier

2 Answers

My new tankless WH stopped working. It gives hot water for about 15 sec, then starts flashing C7 12 or C2 11. How can I fix this, We had it for a month now & it worked before.

11 The Gas Shutoff Valve is not opened

12 Gas Service has been interrupted.
LP Gas is running low. (LP models only)

I think C7 is where the startup sequence ended...and then you get the error code

If less than a month your customer support

Nov 01, 2009 | Rheem EcoSense by 7.4 GPM Outdoor...

2 Answers

Amcoraire / aos241hx / code p8 / unit shut down will not restart

for all error codes.

Jun 30, 2009 | AmcorAire UCHW-H24AF2 Split System Air...

1 Answer

Chigo Wine Fridge Error

I have a Chigo that displays error code E2.1 alternating at times with E8. The unit runs intermittently. My dealer and I agree the control circuit board is faulty and should be changed at a cost of $125. It is likely due to a failure of the control circuit board, but more specifically the circuitry on the control board related to the upper temperature sensor. The connectors for the sensors and the connector between the compressor and the control and relay boards are also flakey, and this could be the cause, but I could not isolate a bad connection, so will change the control board and hope that fixes the problem.

Mar 22, 2008 | Refrigerators

2 Answers

Service code EC?

05 Refrig. Cabinet Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s
06 Refrig. Evaporator Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s
07 Freezer Cabinet Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s
08 Freezer Evaporator Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s
20 Defrost Under-heat with No Voltage Feedback Through Gray/White Wire at Defrost Start
21 Defrost Overheat
22 No Voltage Feedback Through Gray/White Wire at Defrost Start
23 Defrost Overheat with No Voltage Feedback through Gray/White Wire at Defrost Start
24 Defrost Under-heat
30 Excessive Icemaker Water Valve Solenoid Activation (Exceeded 15 Seconds)
40 Excessive Freezer Compressor Run
50 Excessive Refrigerator Compressor Run

Jan 21, 2008 | Sub-Zero 632 / S

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1383 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Brad Brown

Level 3 Expert

15628 Answers

Are you an Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides