Question about Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

Wind Tunnel U6436-900 power switch is always on. Vacuum will not turn off.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 97 Answers

The switch is the problem. if the machine is under it's warrenty take it to your local vac shop if they can do the warrenty. if it's not then you can order the switch and i can walk you through replacing it. you will need to order a switch kit and i beleive the part num. is #40309033 but the num. might have changed

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my hover wind tunnel vacuum turn on


First of all you have checked to make sure you are plugging into a outlet that has power correct ? If you have power at the outlet then when you activate the switch does it make any noise at all ? If not you may have a defective switch. If it's making a noise you may have a broken belt or something jammed in the brush.

Sep 03, 2014 | Hoover U8126-900 Wind Tunnel Dual V...

1 Answer

Hoover bagged wind tunnel 2 vacuum turns its self off after about 10 min. of normal vacuuming I can press the power button right away and the vacuum will turn back on and vacuum for sometime as long as 5...


There is a thermal sensor in the motor which shuts power off if it gets too hot but usually it won't turn back on until it cools down. It seems you might have a defective switch

Oct 06, 2013 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

How do you change the Hoover wind tunnel belts?


If you turn the vacuum over there will be (4) screws that hold on the base cover for the roller brush. Remove the screws and the cover and you can get to the belt(s). You can get replacement belts here:

Hoover Windtunnel Belts

Nov 18, 2009 | Hoover Company Wind Tunnel U53019 Upright...

1 Answer

Hoover Wind Tunnel does not turn on


that is a pretty good lifespan for a hoover, but its probably the power switch that's bad. Hoover uses a very poor quality switch. It shouldn't cost to much to have it replaced

Jul 05, 2009 | Kenmore 33721 Upright Vacuum

1 Answer

No power to Hoover Wind Tunnel Vacuum


the problem is likely the switch a shot of wd40 should fixed it

Oct 09, 2008 | Hoover U6630-900 WindTunnel Bagless...

2 Answers

Wind Tunnel Model: u6630900


Need a manual for Hoover Vacuum Cleaner, Wind Tunnel Model:u6630900

May 21, 2008 | Hoover SteamVac Carpet/Upholstery Deep...

1 Answer

Repplacing power cord on Hoover Wind tunnel (not self propelled)


Hi
This is HARD and you NEED electrical knowledge and IF NOT UP TO IT YOU COULD CAUSE PROBLEMS TO YOUR SELF AND OTHERS.
You do not say what the problem is with the cord.If is it damaged then it needs to be replaced with a new one.and then above applies.
Take Care as to what you do.
SAFETY FIRST---ALWAYS
Hope this helps
Jay

Nov 17, 2007 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

Embeded Dirt Finder


check out the switch that activates it. go to thehooverstore for a complete listing of hoover machines. I'm sure you'll find your machine listed along with an exploded diagram of the machine

Sep 19, 2007 | Hoover U6437-900 / U6439-900 Windtunnel...

Not finding what you are looking for?
Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...