Question about Xerox WorkCentre XL2140df Laser Printer

1 Answer

Getting message H4 - Xerox WorkCentre XL2140df Laser Printer

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.

  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.
getting message H4 - elem_1_spacer.gif

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp ar-310nt getting an error code h4-01


Fusing unit error.try to cancell by using program/simulation.cancell by 14

Nov 19, 2013 | Sharp Office Equipment & Supplies

1 Answer

What does Olivetti d-copia 120 error message H4 mean?


  1. H4 00 means Heat roller abnormally low temperature

Jan 26, 2013 | Office Equipment & Supplies

6 Answers

Sharp ar 5516 printers error h5. h4


hi,I have error code L h on my coppier sharp 5516. your help please.

Aug 05, 2010 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

SHARP AR C150 COPIER-ERROR MESSAGE H4-01


H means heat, you have a bad fuser.

Jan 28, 2010 | Sharp AR-C150 Copier

1 Answer

I have a h4 recorder and when i turn it on i get a no card reading .changed card still same message


Are you using the type of card recommended in the manual? There's also an update here that you might like to have:http://www.zoom.co.jp/english/download/software/h4.php

Sep 11, 2009 | Zoom H4 Handy Recorder

1 Answer

Connect to PC does not work


You need to upgrade the H4  firmware from Zoom website
http://www.zoom.co.jp/english/download/software/h4.php

You will need an external SD card reader.
Good Luck

May 06, 2009 | Zoom H4 Handy Recorder

1 Answer

Error Message H4


It is a fuser problem, sometimes it can be reset by technician or you should replace the fuser lamp

Apr 02, 2009 | Sharp AL-1530CS All-In-One Laser Printer

2 Answers

Title: Zoom H4 / Mac USB Problem


Upgrade firm ware from Zoom website
http://www.zoom.co.jp/english/download/software/h4.php

You will need an external SD card reader.
Good Luck

Mar 07, 2009 | Zoom H4 Handy Recorder

1 Answer

Sharp H4 Error message


Hello sir; The code need to reset;
1, press "#", "interrupt", "c", "interrupt" keys.
2, enter 14 then press start.
3, if machine work, please don't forget to give me a good rating.
THANK YOU !!!

Feb 09, 2009 | Sharp AR-5316 Advanced Digital Imager...

3 Answers

Cant get rid of blinking error message, nothing works


The correct buttons to push in order to get into the service mode on a 162D are [#] key, [*] key, [C] key and [*] key. Then you key in 14 - 00 and press the Start key. If that fails to bring your machine back on, you'll have to replace the fusing assembly.

Apr 12, 2007 | Toshiba e-Studio162D Copier

Not finding what you are looking for?
Xerox WorkCentre XL2140df Laser Printer Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

68 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...