How to turn off programed setting to go bsck to manual

Your drive belt has snapped, and probably didn't fall out on the ground, so it's still lying on top of the deck around the drive spindle. You'll need to replace it , of course. consult your manual for the proper drive belt size and number.

Give the below link a try: facebook provides options if you loose access to email/phone numbers used to reset passwords.


Help Center

have fuel filter replaced.

Have you checked to see if the catalytic converter or muffler is stopped up ?
Is the EGR valve working correctly ?

Look inside the glove box. On the bsck side of the glove box door there should be a small sticker with two sets of numbers. The number set with five (5) digits is your reset code. Use the station reset buttons on your radio to enter these 5 numbers. If entered correctly, your radio should come on instantly.

try turning ur phone off and keeping it off for 5 minutes. and remove your sim for a couple minutes. put it back in and turn it on it should be gone

Turn unit off. Press soft reset. Holding it down, turn it bsck on.

Is it connected to Bluetooth ?

Her is the i-mate smart flim support website to download every thing you may need including the manual as well as al of the FAQ.

did you have the user manual