Question about LG RU-52SZ51D 52" Rear Projection HDTV-Ready Television

2 Answers

I have an LG DLP. that turns off after 15 -30 seconds

I turned on the tv, it blinks yellow on the first light, then yellow on the second light, then goes to red and turns off. No picture or sound. It is the LG RU44SZ61D. I had the lamp replaced 14 monhs ago

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 35 Answers

If the second light is blinking to orange or red, that is usually the lamp indicator light on an LG DLP tv. That indicates your bulb needs replaced, or something surrounding the bulb has failed (like the cooling fan for the bulb for example) IF you have a spare bulb handy, I'd replace the bulb, keeping in mind if you touch any part of a new bulb with your bare hands, you just cut the life of the bulb by more then half.

Posted on Jul 31, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

My LG Dlp that turns off after 30 secs. The lamp isn't that old. The lamp indicator blinks red when it shuts off the turns back to oragne.

Posted on Dec 18, 2009

  • Todd Hill
    Todd Hill Mar 21, 2011

    c871 1000mic

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi 73" DLP powers on, through welcome


If you are getting at turn on source and back ground is all blue the set will shut down rather quickly;

I have a suggestion, if it works fine, and if not it will not hurt anything.

with original Mitsubishi remote turn set on and then Menu, 1,2,3, enter.

This is the soft reset that most of these sets have (cannot be sure since Model number above is correct?)

The reset button on the front (if it has it) just shuts the set down and reboots the DM unit inside.

Most of these sets when it is pressed the green light will blink for about 70 seconds and go out; that is the DM unit rebooting and the soft restart is something else.

Let me know what you find before you rate this information.

SD TECH

Oct 05, 2011 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Tv wont turn on... light blinks yellow as if its going to power on.. and just shuts off... for my zenith dlp 52 inch tv


I had this same problem. The Zenith rep told me to unplug the TV, hold the power button down for 30 seconds, plug it back in and then turn it on. It worked and I haven't had a problem with it since. I hope this helps. Good Luck!

Mar 06, 2010 | Zenith D52WLCD 52" Rear Projection...

1 Answer

I have a philips dlp 55pl9773 has one red flashing led on the front when i do a hard reset tv boots up lamps lites led goes from flashing yellow to green for about ten seconds and then back to red flashing...


MY philips tv model number 55PL9773/17 WAS TURNING OFF THE SCREEN AND LEAVING THE AUDIO ON FOR ONE MINUTE. THEN THE YELLOW LIGHT STAYED ON. THEN THE LIGHT TURNED OFF. thEN I TURNED ON WITH THE REMOTE AND THE YELLOW LIGHT TURNED ON AND A FEW SECONDS LATER CHANGED TO THE GREEN LIGHT AND THE TV TURNED ON. AFTER A FEW MINUTES, BETWEEN 10 AND 30 IT DID THE SAME THING. NOW IT IS OFF WITH A BLINKING RED LIGHT PERMANENTLY ON. TO TURN IT OFF I HAVE TO UNPLUG IT FROM THE WALL. I REPLACE THE LAMP A FEW WEEKS AGO AND IT IS FINE.

Dec 01, 2009 | Philips 55PL9773 55" Rear Projection...

1 Answer

No picture yellow standby light blinking


how old is the tv is it possible your lamp is burned out this is what a dlp screen would do.

Apr 14, 2009 | LG RU-52SZ51D 52" Rear Projection...

2 Answers

LG DLP RU-44SZ51D Lamp Indicator blinks red


44 inch lg dlp hdtv no picture or sound press power button standby light turns yellow and then back to red

Mar 04, 2009 | LG RU-44SZ51D 44" Rear Projection...

1 Answer

SAMSUNG DLP HL-S5086W


check the horizontal transistor if, good.re solder your tv.

Sep 28, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

Zenith DLP-Projection tv 42"


Try this solution which I found on Fixya

This solution is for the zenith 56" DLP. Unplug the tv, either from the wall socket or the TV. While the TV is unplugged hold the power button on the TV for 40 seconds. This lets the excessive power drain from the TV. If this does not work call 1-800-243-0000. This is the number for their help line. This is the fix the tech gave me and it worked right away. Hope this helps and have a great day.

Zenith dlp projection model z52sz80 turns off randomly

Further advice here. If the bulb is over a year old it is suspect.

LG DLP TV wont power up Red indicator lightjust blinks when

and where I got all this information frlom

zenith dlp projection tv blinking red light Google Search

Jan 09, 2018 | Zenith Televison & Video

Not finding what you are looking for?
LG RU-52SZ51D 52" Rear Projection HDTV-Ready Television Logo

1,118 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75471 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...