Question about Electrical Supplies

2 Answers

Coleman 6250 Generator won't turn over

I have a Coleman 6250, with a Briggs and Stratton Engine, we changed the oil, put fresh gas, cleaned the carburetor with Seafoam and blew out the prot holes, put it back together and still the engine won't turn over, and no gas is getting into the carburetor.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 867 Answers

Try removing the air filter and try starting if it dirty or to oily , no vacuum is created to pull the fuel into the carb

Posted on Jul 30, 2009

Testimonial: "I removed the air filter,then put air filter back on,it started for 2 mintes.I shut it off, but then allot of gas just spewed out of the air filter?"

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey just read about the SeaFoam. Had the same problem with my Coleman 6250 would not turn over, got some Sea Foam added about 5 ounces to a full tank and it started Right up. No problems. Thanks for all the help

Posted on Aug 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power cord does not retract immediately


Coleman Powermate Generator 5000 Watts / 6250 Watts ...

? 3:27
https://www.youtube.com/watch?v=IROa5QfPqkU
Nov 8, 2012 - Uploaded by Carlos Roman
This 5000 watt generator is great for backup power at home or forpower ... Coleman Powermate Generator 5000 Watts / 6250 Watts ... This feature is not available right now. ... folding handle, 1 quart, of oil, and 25ft generator convenience cord. ... How to convert a generator recoil starter to an electric starter!

pull cord won t retract Power Generators Questions ... - Fixya

www.fixya.com > Forum > Tags > pull cord won t retract
Power Generators pull cord won t retract questions and answers. Ask your pull cordwon t ... Question about Powermate Powermate 5000W Generator. 2 Answers · I was running my coleman powermate 6250 gen power ... cord 6250 trips out ... The pullcord does not rewind onto the pulley when pulled. At first I thought it was ...

Best Portable Generator Reviews



Feb 03, 2016 | Coleman Powermate Powermate 5000W...

1 Answer

Generator 6250 coleman spark plug will no fire


First check your oil level. The low oil sensor kills the ignition to protect the engine from damage.

Second, replace the spark plug.

Sep 17, 2014 | Briggs & Stratton Electrical Supplies

1 Answer

Looking for a carb for a Coleman Powermate 500/6250 generator with a 10hp Briggs and Sratton engine...any suggestions?


As it is a Briggs Engine most quality Briggs dealers can get the carb. It isn't special to Coleman I don't believe.

Oct 08, 2013 | Coleman Powermate Premium Plus 6250W...

1 Answer

I have a Briggs and Stratton Elite series5500 watt portable generator. I cannot get it started. It has gas and oil but will not start. What could be the problem


Ensure choke is turned on while starting.
Ensure spark lead is fully pushed onto plug.
Remove spark plug and check there is a spark by keeping spark plug against body of engine and cranking engine, if no spark check there are no broken wires in ignition circuit.
Turn off gas tap if present. Remove the float bowl while holding a container under it to collect any gas. Turn on tap and check the fuel flows freely.
Check the air filter is clean. If it has foam elements these can be washed with warm water and detergent, rinsed and then oiled with a teaspoon of oil evenly distributed through the foam.

May 01, 2011 | Briggs & Stratton Briggs and Stratton...

1 Answer

I have a coleman powermate premium plus 6250 generator,put in new plug ,new filter ,changed oil,cleaned the carb,put in new gas. runs ok at half choke but when go full choke it starts backfiring and runs...


if you are running the engine at full CHOKE, then it is flooding the engine, but if you meant off full choke, then the carb is still stopped up. Try soaking in carb cleaner overnight after removing jet & all rubber goods. HOPE THIS HELPS.

Dec 17, 2010 | Coleman Powermate Premium Plus 6250W...

1 Answer

My propane generator engine has apark and gas


For a quick test.

Check engine oil.

Remove wire from low oil sensor and see if it starts every time.

If that works change oil and replace low oil sensor.

Hope this tip helps to solve your problem.

r/
David

Jan 19, 2010 | Briggs & Stratton Briggs Stratton Intek V...

1 Answer

9hp briggs and stratton engine has gasoline in the engine oil


Old gas, gone bad from sitting. Drain all gas out and use carb cleaner in unit to clean. Add fresh gas.

Oct 01, 2009 | Coleman Powermate Powermate 5000W...

1 Answer

Misplaced User Manual for Coleman Powermate 6250


I would run a search on line for your model number. I will look and let you know.

Feb 02, 2009 | Coleman Powermate Premium Plus 6250W...

Not finding what you are looking for?
Electrical Supplies Logo

Related Topics:

986 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

ken skalski

Level 2 Expert

152 Answers

Gene Haynes

Level 3 Expert

5245 Answers

Brad Brown

Level 3 Expert

16231 Answers

Are you an Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...