Question about Lenovo Thinkvision 19" LCD Monitor

3 Answers

It says "not signal input" and goes to a black screen

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 125 Answers

Can be many things, but I would check RAM first.
Remove the RAM and reinstall it.
If you have (or can borrow) some of the same type of RAM, try that.
If you have more than one stick of RAM, try them one at a time.
Otherwise, probably your graphics card gone south.

Posted on Jul 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,188 Answers

You have not selected correct input mode in the LCD control panel(if it has more than one input connection).
OR you are using an AGP or PCI-E card which is not configured to give output in the bios.
OR the video card is faulty.

Posted on Jul 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 110 Answers

1st your ram is not correct fixed and your data cable is not correctly plugged.

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The inputs on my RCA scenium dlp tv wont work.


It sounds like your talking about the ITC222 chassis series which is having a small signal board problem. Very common in the RCA ITC222 and ITC222A Chassis HDTV's

Jul 12, 2010 | RCA Televison & Video

5 Answers

Screen goes black and resets during HD shows


Have you already tried to power cycle all the devices? Unplug the power cable on all your devices for about 1 hour then plug it back in. Check if that fixes it.

Aug 31, 2008 | Sony KP-53HS10 TV

1 Answer

Screen goes black, reset "no input signal" goes black again with yellow light


install the display drivers, before that remove all the ram and other pic cards and insert the ram one by one the restart

Jan 28, 2010 | Computers & Internet

1 Answer

Philips 32PFL5322D/37 Black w/any of the analog inputs. Tuner ok


WHEN IT BLACKS OUT, GENTLY PUSH OR TAP ON THE SCREEN. YOU SHOULD SEE A SLIGHT WHITE DISCOLORATION WHERE YOUR PUSHING. IF THIS HAPPENS YOU PROBABLY NEED A MAIN TOTAL ASSY. DO YOU STILL HAVE AUDIO WHEN IT BLACKS OUT?

Sep 25, 2009 | Philips Televison & Video

1 Answer

65" Mitsubishi Projection Television keeps flashing black screen


check your closed caption, long time ago there were 4 cc options. Turn it completely off, that might get rid of it.

Jul 18, 2009 | Televison & Video

1 Answer

I get lines running across my television (wd62525), especially noticeable when screen goes black. video noise? and it moves horizontally across the screen.


Sounds like interference or signal contamination. Does it occur on OTHER inputs? If not..then the input signal is corrupt, weak, has interference, wrong cable, or othewise defective.

Jun 09, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Input signal out of range


You could try going into safe mode and make sure the correct drivers are installed and if they are then you can then set the correct resolution.

Feb 28, 2009 | Dell OptiPlex GX260 PC Desktop

1 Answer

Philips 15PF9925 TV


I had same problem, it was the backlight board. I got the part KUBNKM029A 15PF9925/17S from www.shopjimmy.com

Dec 19, 2007 | Philips 15PF9925 15 in. LCD EDTV

1 Answer

Foot note to issue


If the source to the PIP input is a color signal then the PIP display will be color. PIP sets have two video sources one goes to the main screen while the other goes to the PIP. it all depends on what the format of the signal is being sent to each input. This is quite normal.

Jun 29, 2007 | Mitsubishi VS-45607 45" Rear Projection...

Not finding what you are looking for?
Lenovo Thinkvision 19" LCD Monitor Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lenovo Computers & Internet Experts

Michael Vincent Cruz

Level 3 Expert

868 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

rey francis basa
rey francis basa

Level 3 Expert

666 Answers

Are you a Lenovo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...