Question about InFocus ScreenPlay 61" Rear Projection HDTV

1 Answer

Purchased a new bulb because my old one was starting to fade this will be bulb number three received a new bulb for my infocus 61md10 install was very easy no problems beautiful picture as usual after 45 minutes received a large black circle in the middle of my TV could still see regular TV on the outside edge but something had definitely happened after installing. i removed the new bulb and put the old one back in hoping it was just a bad bulb but the black spot was still there. I am stubborn and like to fix things myself but I can't find any information where the problem may be or what has happened all help would be appreciated thanks in advance

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 167 Answers

This is an ATC323H Chassis. The DM module could be the problem. Here is a factory Troubleshooting guide to confirm the correct operation of all of the Light Engine circuits. Be careful on this one because there is 20,000 volts present to fire the Lamp. You should call a good TV Tech in my opinion.
http://www.repairworld.com/index.php?act=Attach&type=post&id=14822

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where could I get the plastic lens for my infocus 61md10


Remove the little plastic lens and throw it away. There is no replacement available anyway. Reassemble the tv and it should work fine. Mine has been good for quite a while now.

Dec 08, 2011 | InFocus ScreenPlay 61" Rear Projection...

Tip

61md10 infocus daek picture


I just replaced my Bulb and bought it on E-Bay for $199.00 including shipping. Looks like a new one!!!!!! A new bulb WILL fix a dark picture on this unit.

on Jan 04, 2009 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

How can i fix the brightnees in my 61md10


there is a menu setting for best pix or longer lamp life.
Also, turn up brightness of picture settings(different menu)
Also use daylight setting, vibrant, (different menu).
Bulbs dim over time and dust can accumulate on projector lens, mirrors and (not so much on mine) back of screen.
New lamps tend to melt a plastic lens in light engine, a dark shadow may start to appear upper left or center. this started to happen to me with new bulb, (Ebay O.E.M. supposedly $114). I switched back to original lamp hopefully to slow the burn till I can tacklle a repair. Take a look at this website. Hope that helps.
http://www.61md10.org/modules/newbb/viewtopic.php?post_id=2651

Mar 10, 2010 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

I have a infocus 61md10 tv. It wont turn on


may be a dead DM3 board.
join google group dedicated to DM3 troubleshooting:
http://groups.google.com/group/dead-dm3

Nov 18, 2009 | InFocus ScreenPlay 61" Rear Projection...

2 Answers

61md10 front panel controls lit uo, but the TV does not respond


With a non responsive remote that would be inpossiable you need to replace the control board inside around $100 bucks then you can have a good tv again but to get to the service menu your controll has to be working.

Aug 19, 2009 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

Infocus 61md10 wont boot up


Unplug it from power source for an hour to two hours reconnect and turn on

Aug 16, 2009 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

Infocus 61md10 ScreenPlay projects "BLUE PEOPLE"...HELP!


sounds like the color wheel isnt spinning at the right index speed, most likely due to bad bearings in the color wheel.

Jul 10, 2009 | InFocus ScreenPlay 61" Rear Projection...

3 Answers

I get 5 blinks on the panel and picture goes out....


If you read the manual the 5 blinks indicates that the bulb needs to be replaced.

Oct 27, 2006 | InFocus ScreenPlay 61" Rear Projection...

Not finding what you are looking for?
InFocus ScreenPlay 61" Rear Projection HDTV Logo

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Televison & Video Experts

Donni Steen

Level 3 Expert

659 Answers

Brad Brown

Level 3 Expert

15441 Answers

rostit

Level 3 Expert

495 Answers

Are you an InFocus Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...