Vista drivers for Epson dx4400 printer.

hi.. i checked the epson website, and fortunately, i found a driver for your windows 7,
click this link
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=25301&prodoid=36478881&infoType=Downloads&platform=Windows

and download :

TWAIN Driver and EPSON Scan Utility v3.04A
Windows 7 32-bit Edition compatible, Windows 7 64-bit Edition compatible, Windows Vista 32-bit Edition, Windows Vista 64-bit Edition
epson12258.exe


this is compatible for your printer, goodluck

ISSUE : Epson Stylus TX100 is not working with VISTA Computer
Environment :
Printer : Epson Stylus TX100
Computer Operating system : VISTA
Analysis : According my understanding your printer use to work with different operating system like XP Home /Prof. etc But it is not working with VISTA

SOLUTION :
Cause of your problem might be : Software issue
To get the print out of printer your computer need to have a driver software on it. You can check the compatibility information written on the CD / DISK itself
Else you can also download the Compatible drivers from the following link of EPSON
http://www.epson.com.ph/epson/drivers/driver_download.htm?dc=1&mode=3&m=false&catid=4&pid=1373
or you can simply open www.epson.com
and click on Drivers and Support and select the printer -- you can easily download the drivers ...

I Hope it will solve your issue

You need to dounload the Vista driver at link below.

http://download.ebz.epson.net/dsc/du/02/DriverDownloadInfo.do?LG2=EN&CN2=SG&CTI=4&PRN=Stylus Photo R230&OSC=WS


Good luck

hi.
hi i have a same problem as u have. but for now i am using generic driver using generic text drive only. and pls dont forget to keep ur port as com1 plus change ur bit to 19200 otherwise that also will not work.

Cant find such a scanner, are you sure of the model "performance", If it is not Vista compatable, ie if Epson have not released a Vista driver, then it is not going to work with Vista.

See Epson web and download driver if available, if not change scanner or operating system or purchase software

Check your Epson product CD to see if it already contains Windows Vista drivers. If the CD indicates support for Windows Vista, follow the instructions that came with your Epson product to install your driver and other software.

If your Epson CD does not indicate support for Windows Vista, DO NOT INSERT YOUR EPSON PRODUCT SOFTWARE CD IN YOUR WINDOWS VISTA COMPUTER because the setup program is not compatible with Windows Vista. Instructions for installing additional software from your CD may be available with your driver download.

Note: If you already have ArcSoft PhotoImpression™ 5 installed on your Windows Vista computer, you may need to install a "patch" program. Go to the ArcSoft website to download and install the patch.

Products that are not Vista compatable are not capatable with Vista, who would figure hey!!

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here: Epson Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website, or use the disk and run the install file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Note:some printerdoes not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

hi friend

http://www.epson.com.ph/epson/drivers/driver_download.htm?dc=1&mode=3&m=false&catid=1&pid=2

there is no driver for vista if u whant to use priter u must have xp opreting system

I have an Epson Stylus Rhoto R220 inkjet printer for 10 months and i would like to know if its going to work with Vista Windows PC or it won't recognize my printer. How do I upgrade it or get it compatible ?Thaks

You can use windows 2000 drivers on Vista for this printer, according to this article:

http://www.prophetline.com/node/141

Epson.com Vista Print drivers have just recently 09/13/2007 posted, Download, install, restart, plug printer in. You're Done!