Question about Panasonic KX-T7730 Corded Phone

2 Answers

How to make conference call in KX-T7730

Could not make conference call

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 60 Answers

Generally on most systems you have a conf call button or feature code. If so, You place the first call. press the conf call button. this puts that call on hold you either automatically get a second dial tone in your ear or you need to press a line key or dial 9. once the 2nd call is placed press the conf key again and the calls will be joined.
This is a general description some systems have variations of this, Hope it helps.

Dan

Posted on Jul 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

checkitright
  • 1362 Answers

SOURCE: KX-T7730 programming manual

http://www.retrevo.com/

Posted on Aug 07, 2008

cnavarro
  • 2460 Answers

SOURCE: change the ring tone of Panasonic KX-T7730

I think it can be done. Just exchange the phone for a 7633 and change out the TA for a TDA-50.

Piece of cake.

Carl

Posted on Aug 25, 2008

  • 1 Answer

SOURCE: kx-t77730

in the left side of phone is a ringer setting key, put it in big bell symbol

Posted on Dec 21, 2009

Phonesmith
  • 113 Answers

SOURCE: how to set the clock at a panasonic kx-t7730

Basically, there are 2 ways of programming the date
and time - the short way and the long way.
If you are using the KX-T7730 phone on a Panasonic
KX-Txx 308/824 system:

SHORT WAY:
From the Switcboard / Main telephone
( ext 101, 10 or 9 ) with the handset on the
cradle/hook:
1. Press PROGRAM 0
2. Enter Date and Time
( The format is: yymmdd,
1 to 7 1=Monday 2=Tuesday etc, hh:mm,
0 or 1 0=AM 1=PM ) see example
3. Press AUTO DIAL / STORE to save your changes
4. Press PROGRAM to exit program mode

EXAMPLE:
If the date and time is 3 February 2010 Tuesday 2:15 pm you will enter as follows:
100203 2 02:15 1

LONG WAY:
From the Switcboard / Main telephone ( ext 101, 10 or 9 ) with the handset on the cradle/hook:
1. Press PROGRAM * # followed by the system
password ( default is 1234).
2. Now press 000 and then SP-PHONE.
Enter the year.
3. Scroll to the month with the right scroll key
(located at the right bottom corner of the phone).
To change the month use the AUTO ANS / MUTE
button.
4. Now scroll right again and change the date and
day.
To change the day, again use AUTO ANS / MUTE
5. Scroll right again and the time will appear.
Set the time.
To change am/pm scroll to it, and again,
use the AUTO ANS / MUTE button.
6. Press PROGRAM to exit program mode and you
are done.

Posted on Mar 28, 2010

Phonesmith
  • 113 Answers

SOURCE: How do I change the time on a KX-T7730 phone?

Basically, there are 2 ways of programming the date
and time - the short way and the long way.
If you are using the KX-T7730 phone on a Panasonic
KX-Txx 308/824 system:

SHORT WAY:
From the Switcboard / Main telephone
( ext 101, 10 or 9 ) with the handset on the
cradle/hook:
1. Press PROGRAM 0
2. Enter Date and Time
( The format is: yymmdd,
1 to 7 1=Monday 2=Tuesday etc, hh:mm,
0 or 1 0=AM 1=PM ) see example
3. Press AUTO DIAL / STORE to save your changes
4. Press PROGRAM to exit program mode

EXAMPLE:
If the date and time is 3 February 2010 Tuesday 2:15 pm you will enter as follows:
100203 2 02:15 1

LONG WAY:
From the Switcboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook:
1. Press PROGRAM * # followed by the system
password ( default is 1234).
2. Now press 000 and then SP-PHONE.
Enter the year.
3. Scroll to the month with the right scroll key
(located at the right bottom corner of the phone).
To change the month use the AUTO ANS / MUTE
button.
4. Now scroll right again and change the date and
day.
To change the day, again use AUTO ANS / MUTE
5. Scroll right again and the time will appear.
Set the time.
To change am/pm scroll to it, and again,
use the AUTO ANS / MUTE button.
6. Press PROGRAM to exit program mode and you
are done.

Posted on Mar 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

International Conference Calls: What are the best in terms of quality and most cost effective international conference call services?


Keeping up to the competitive trend the world is dealing with; the conference calling sector too is undergoing the same. Here are some of the best international conference call service providers both in terms of cost plans and service quality:

>Vast conference- It offers operator assistance upon conference calls for some additional but affordable charges.
>Infinite conferencing- You enjoy the privilege of sharing the call recordings upon private and public social media sites at the time of using infinite conferencing.
>RingCentral- It offers numerous interactive features such as easily accessible document sharing feature.

However, in terms of best in quality and cost effective international conference call, Reliance Mind Bridge is a reputed company to deal with. Its MindBridge Freedom service is a reservationless conference service to conduct easy conference anytime, anywhere.

May 16, 2017 | Lands Phones

1 Answer

I need a card for conference calls. where can i get one and for how much.


Conference calls can be made for free.

To set up a conference call:
  1. Dial 305 848 8888
  2. Select "Set up a Conference Call" and follow the prompts.
You will create a password and will be given a 10 digit code.
Distribute the code, time of call, and dial in number (305 848 8888) to all conference call attendees. You may use the access code for any future conference calls as well.
To join a conference call:
  1. Dial 305-848-8888
  2. Select "Join a Conference Call"
  3. Enter the pin

Nov 14, 2013 | magicjack.com

1 Answer

Panasonic kx t7436 how many conference will do conference


you can do as many conferences as you have phones, but one phone can have one conference at a time with 3 total parties(depending on your phone system) in the conference (so yourself and 2 other people, inside or outside of the office)

if you have a TDA/TDE/NCP phone system (blue box on the wall or in a computer rack) you can have 5 people in a single conference...

if you have a TD phone system (white box on the wall) you are limited to a 3 party conference

Jan 06, 2011 | Panasonic KX-T7436 Phone (KXT7436000000)

1 Answer

How do we arrange a conference call?


While on a call, press conference or transfer button(will put first call on temporary hold). Make call to next party, talk to party, press conference button to join all callers. Same procedure to add more parties up to 8 total.

Also, if you use transfer button to start conference call you can use transfer button to join all parties.
If you use conference button to start conference call use conference button to join all parties.

Dec 15, 2010 | Panasonic KX-T7130 Corded Phone

1 Answer

MITEL 5303 Conference Phone question: during connection of a few numbers and 1 number is busy - how do you drop that call without dropping all parties connected?


I believe that if you reach a busy signal, you can hang up. The conference should ring you back and the rest of the conference will be there.



Here's what the documentation shows from within the help of a 3300 ICP/MCD...



a 5303 is to be treated just like a 2500 series set...

2500, 5302 IP Phone, SUPERSET 401, SUPERSET 401+, and SUPERSET 4001 telephones:

To form a Conference when a two-party call is already in place, or to add another party to an existing Conference:

  1. Press Flash or flash the switchhook.

  2. Dial the number of the next party.

  3. Wait for an answer.

  4. Press Flash or Flash the switchhook.

  5. Dial the Conference Call Feature Access Code.

To Leave a Conference:

  • Hang up.


2500 telephone:

To split a Conference and speak privately with the original party:

  1. Flash the switchhook.

  2. Dial the Conference Call Split Feature Access code.

Sep 30, 2010 | Mitel 5303 Conference (50001905)

1 Answer

How do I start a conference call on a Mitel 5303 Conference Phone? It states it only hosts up to 8-10 people.


I'm assuming you are using this on a 3300 ICP. In that case, the phone system is only able to do 8 party conference calls without an external Conference server.
You can dial the first number, press the flash button, dial the next number, dial the feature code (get from your vendor), repeat until you have all parties as part of the call.

The 5310 IP conference unit works much easier than this phone. A conference bridge such as Audio Web Conference with the appropriate licensing will allow for extended conference calls... it will also allow you to record the call for later "off-air" participation.

Sep 23, 2010 | Mitel 5303 Conference (50001905)

2 Answers

Three party conference call


Once you receive your first call Press conference button. your first call will automaticaly be on hold. Press a line button to dial second number. Once call is connected Press conference button and you will have 3 way conference.
To add more PeoPle into conference Press conference button again and select a new line. Dial the number and Press conference button to connect everyone to that conference.

HoPe this helPs

Jul 17, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

HOW TO DO A CONFERENCE CALL


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

May 14, 2009 | NorStar M7324 Telephone

1 Answer

Unable to use conference button


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]
  • Establish a conference call between yourself and two other parties.
    1. Make or answer the first call.
    2. Put the first call on hold.
    3. Make or answer the second call.
    4. After the second call is connected, press [Feature] [3].
    5. Press the line or intercom button of the first held call.
    6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Mar 11, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

Dropped Conferences


You need to upgrade the code on your system. This happened to me and upgrading the code fixed it. Good luck!

Oct 24, 2007 | Polycom VSX 7000 Video Conference

Not finding what you are looking for?
Panasonic KX-T7730 Corded Phone Logo

Related Topics:

4,207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

john milligan

Level 3 Expert

512 Answers

george  peters
george peters

Level 3 Expert

860 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...