Question about Sansui VRDVD4005 DVD Player/VCR

1 Answer

DVD must be overheating

When watching a movie the player starts skipping and jumping or maybe better said starting and stopping near end of movie.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 244 Answers

General failure when units warm / hot in high humidity environments. Units operate normally once cold, failure only occurs occasionally then seems OK but when warm fails again
Many PCB's/components have contamination which will manifest themselves in warm and humid environments, so once unit is warm then electrical failure occurs. Clean circuit first in solvent/water combination and retest unit. Failure should dissapear. If corrosion found on joints then reheat with soldering iron which you may see joints bubble then clean PCB thoroughly. Best to soak in cleaner then wipe around with lint free wipe especially around powered components. NOTE contamination is typically hygroscopic and will attract moisture if particularly bad will electromigrate if not too bad then poor SIR Surface Insulation Resistance (occasional unexplained failure) Could go on for long time but this is only the start! Does this sound familiar to anybody ??

Posted on Nov 24, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

JSI JS5001 DIGITAL HOME THEATER RECEIVER/DVD PLAYER w/ 5 Speakers & Woofer


Make sure your speakers and dvd player disk is clean. Skips are common from the lazer reading and will read much better with a quick check on the cd.

May 02, 2015 | home Audio Players & Recorders

1 Answer

I use my samsung ht-z210 to play divx through usb and 8GB stick. With some divx movies the movie starts, but then the screen goes black for 1-2 seconds (sound and time continue) and then plays on. This...


I can't answer the first part of the question, but the DVD going blocky and jumping sounds like fingermarks or muck on the disc. It could be that when you handle the DVD your finger leaves a mark near the outside edge of the DVD. In future wipe the DVD with a glasses cloth, then handle by the very edge only.

Jul 03, 2017 | Samsung HT-Z210T Theater System

1 Answer

Will stop playing a dvd near end of movie


Problems having to all DVDS movies discs u have?Tries more DVDS movies watching.This problems u discribing right now,might causes by only one movie disc the DVD disc itself is probally the causes of this problem.

Apr 19, 2011 | JVC XV-N650

2 Answers

I have an Acer Aspire 5536. The graphics card appears not able to play movies very well. It jumps and skips a lot when watching movies. The picture may freeze and the picture may stay moving of vica versa....


i think problem lies not with video card but with program which you are using. most probably you have too many programs loading on startup, vista is an os from hell and is not handling priorites very well, but try these solutions:

1. streamline your boot-up to only necessary programs, remove all auto-starting on boot-up like messenger, yahoo, adobe, skype, office and what else what you have, leave only and only what is necessary to run your computer. these program should start only and only when you need them!
2. run ccleaner or similar, remove all rubbish from your computer and streamline your registry as well
3. use "decent" and lightweight video/dvd player, one of the better ones will be free vlc player
4. if you have less than 2gb ram, increase your ram to 2gb
5. if you can afford, upgrade to win7 of same "flavour" as your current vista...

i actually on my own computers disable screen saver when i am watching movies, some savers are very intrusive.

Jul 30, 2010 | Computers & Internet

1 Answer

Dvd player skips after it warms up.


Hello Forshythemart,

I've seen this happen many times do several brands of dvd player.

The one questions if where do you have your dvd player ? In an entertainment cabinet ? On top of another piece of electronic equipment perhaps ?

The reason I am asking these questions is that I believe your dvd player is overheating. Typically that will cause it to stop working properly. You need to make sure it is getting better ventilation be it outside of a cabinet or making sure it isn't sitting on anything generating more heat.

If this isn't the case then please post back and let me know. The more information you can provide the better I can help solve your problem. Thank you for choosing Fixya!

Jul 15, 2009 | LGDVB418 DVD Player

1 Answer

I have a Samsung 1080P 7 DVD player and Samsung LN-T4071F television. I have them connected via an HDMI cable. Nearly all, if not all DVD movies I play get to a certain point and the picture starts...


If you have changed the DVDs and the problem is still there, then the problem can only be the DVD player.
The symptoms you describe cannot be caused by the TV or the connection.

May 19, 2008 | Samsung Televison & Video

1 Answer

ILO Recorder DVD05R - Playback jumps 10min, 20 min and more...


Does the disc still play in other dvd player? My ILO has always been picky to play rentals so I just have a cheap COBY player hooked up to front inputs of my ILO. I use it to watch the dvds, only use the Ilo to record. Saves wear and tear on my ILO but cannot find a universal remote to operate them both and my tv. If it still records okay thats what I would do, just watch the discs in a secondary unit. Sounds like time to start shopping for new recorder.

May 04, 2008 | iLO DVDR05 DVD Recorder

3 Answers

Dvd video player


Your DVD player is having a problem reading the disc. This is what is accounting for the pausing and the slow loading times...especially if it plays other movies without hitches. Even if the DVD is cleaned, some scratching on the disc will prevent it from being viewed properly. Blockbuster shoudl give you another disc to try of the same movie if you ask. Also, you can try getting a cleaner for your DVD player to remove dust and help it read discs better.

Dec 26, 2007 | Toshiba SD-3980 DVD Player

1 Answer

Error Message


Skipping
Remove and replace the graphite grease from the laser transport worm gear assembly (use the correct Technics stuff), replace the worm gear drive belt, and ensure that the tension spring on the C-shaped plastic piece that rides the gear is OK

Nov 24, 2007 | RCA RC5220P DVD Player

1 Answer

Has stopped playing


Skipping
Remove and replace the graphite grease from the laser transport worm gear assembly (use the correct Technics stuff), replace the worm gear drive belt, and ensure that the tension spring on the C-shaped plastic piece that rides the gear is OK

Nov 24, 2007 | RCA RC5220P DVD Player

Not finding what you are looking for?
Sansui VRDVD4005 DVD Player/VCR Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75289 Answers

matt martin
matt martin

Level 3 Expert

1216 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...