Question about Kodak EasyShare V1003 Digital Camera

1 Answer

My LCD screen has a dark spot

After powering up, the LCD screen has a spot as if being pushed by a finger. Small lines radiate from the spot and there is no visual image. I did have it in my pants pocket for a few minutes. Can the LCD screen be replaced in this Kodak EasyShare V1003 digital camera.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

The screen must be replaced. To do it yourself, the screen will cost around $40 from virtualvillage dot com. I just did one. It took about 15 minutes. The ribbon cable is held in by a flip up lock on the main board. Otherwise, it's just remove the screws around the case and pull the bottom edges outward first.
virtualvillage uses Pay Pal only.

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Westinghouse UHD 4K has dark spots on screen. They look like grease spots. Not noticeable until lighter colors are shown on them. I've powered off and I've cleaned surface.


The LCD panel is faulty. Some times its Normal to have small spots of the panel.
If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Nov 26, 2016 | Westinghouse Televison & Video

1 Answer

I have a dark spot in middle of screen, covering about 80% of screen, also have colored lines that come and go. What can I do to repair this problem? Is this a power supply issue?


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Nov 04, 2014 | Olevia 47" LCD TV - 16:9 1920 x 1080 - 2 x...

1 Answer

I have a lenova 3000 100 when I turn it on it goes directly to a white screen?


Dear Ashley,

If you pass the point of your index finger around the border of the screen, pressing the screen just a little bit, do you see a small risk with dark borders at any position on the screen?

If you do find any dark spots when you move your finger around the screen, your LCD screen is broken and needs to be replaced.

Regards,

Miguel L. Martins

Oct 04, 2013 | Computers & Internet

1 Answer

I have a hisesense 40" lcd lked tv.i grabbed it fron the top and my finger touched the screen.now its has about 12"black uneven spot and in the spot i have rainbow lcolor lines..plus one blue vertica


It sounds like you cracked the screen. If it is cracked, you cannot fix it. Your only options are to replace the screen (BIG $$$) or buy a new set. If you can email me a pic of the TV I can tell you for sure if the screen is cracked. LCD screen are very thin, about as thick as a dime and it doesn't take much to crack them.

info@back2lifeelectronics.com

Nov 25, 2012 | Televison & Video

1 Answer

LG W2261 VP HDMI problem, 1920:1080 doesnt fit right, there is 2cm dark screen at the edge of the display Got drivers installed for analog -vga and digital -hdmi Tried the buttons on monitor...doesnt...


This problem seem to be the LCD screen have dead pixels or a bruise spots on the LCD screen itself that why you have dark spot or spots on the LCD Screen.This problems can't be repair because this problems doesn't causes by the electronic circuit boards.Tried move the monitor as an angles to the right or to the left might help some lessen the dark spot on the LCD screen that all you could do.If this problems is a very dard bruised spot will not help all or if it is dead pixels on the LCD screen itself.

Nov 21, 2012 | Computers & Internet

1 Answer

A spot developed in center of screen next day black lines across screen from the original spot


it sounds like you have a small crack on your screen that has gotten worse over time, these black areas are where the lcd crystals aren't active anymore, unfortunately there isn't allot you can do apart from buy a new screen or put up with the black lines.

May 02, 2011 | Gateway FPD 1730 17" Flat Panel LCD...

1 Answer

Small dark spot on right side of screen/lens, also showing up in photos.


Not a good sign I'm afraid to say. If the 'dark spot' is coming through into the pictures that means some pixels are not sensing light. They will look square shaped if you expand the picture on your PC.
If the lCD was faulty (or had some dead spots) this would show when focussing and taking pictures, but, would not show in the final picture.
I'm assuming you have cleaned the lens (just in case) there is a 'dirt' spot that a finger could have put there. (clean with damp soft tissue )
There is a Panasonic help site which I checked but most reported problems were USB connections and battery life etc .. Try it and ask anyway - can always ask -- Ray
http://www.retrevo.com/support/Panasonic-DMC-FH20-Digital-Cameras-manual/id/23641dj090/t/2/

Jan 19, 2011 | Panasonic FH20 Digital Camera

1 Answer

How do i perform a hard reset on my palm pda


  1. Step 1 Straighten a paper clip into a single line.
  2. Step 2 Locate the "Reset" button by spotting a small hole on the backside of the Palm Zire 31.
  3. Step 3 Push the power button on the Palm Zire 31 with your finger and hold it down steadily.
  4. Step 4 Push the paper clip into the "Reset" button's hole while holding down the power button.
  5. Step 5 Release the power button once the screen displays the "Palm Powered" logo.
  6. Step 6 Push the navigational key in the "Up" direction to complete the Palm Zire 31 hard reset.

May 26, 2010 | Palm Zire 31 Handheld

2 Answers

The problem started with a dark spot in the bottom left corner. It grew so that it started to touch the "Start" of the Windows taskbar. The spot was too hot to keep my finger on it while the rest of the...


quote:"The spot was too hot to keep my finger on it while the rest of the screen was cool" You have a partial hardware failure on the lcd's internal circuitry (column and row drivers, stuff like that).
The short time it's working is about the overcurrent protection delay, it cutt's itself the Vcc, Vdd and control signals for limiting the fire hazard.

Oct 13, 2009 | Acer Aspire 1642WLMi Notebook

1 Answer

Lcd screen has a visual whole ... can it be repaired>


LCD is fragile screen, you screen may be damage even when your finger point in. If you still have warranty, claim for the replacement. Otherwise, if you are in OOW, it is costly if you want to replace the new one. So, you have bad luck then.

Aug 17, 2009 | Samsung LN-T3253H 32 in. LCD Television

Not finding what you are looking for?
Kodak EasyShare V1003 Digital Camera Logo

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...