Question about InFocus ScreenPlay 61" Rear Projection HDTV

3 Answers

InFocus ScreenPlay Projection HDTV does not turn on

After a power outage, my InFocus Screenplay projection HDTV had a dark screen and was unresponsive to remote commands or the control buttons on the front of the display. The blue lights on the control buttons on the front of the display come on, but is otherwise unresponsive. Tried removing plug and powering up again, but the same symptoms re-occurred.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I had the same problem. In my case it turned out to be a dead DM3. Those are expensive and difficult to find. I'm trying to figure out how to fix mine.
I've shared details on the troubleshooting i've done so far on this google group:
http://groups.google.com/group/dead-dm3
It's a work in progress. join if you have the time and the will to participate.
i've got a new TV already but it's a challenge and I'd like to figure this out . . .

Posted on Feb 03, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem, has anyone fixed this issue yet? I have no way to access any menus because the screen doesnt turn on, I also cant hear the fan turn on

thanks

Posted on Nov 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

Try accessing the service menu and doing a factory reset on it

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IINFOCUS ATC323H SCREEN PLAY dark screen


Yes, you have to find and remove the burnt lens. After several hours searching for the lens and by taking apart the tv, I finally found this.

Wish I had found it before, would have saved me a TON of time. It shows you where the lens is.

Feb 26, 2013 | InFocus ScreenPlay 61" Rear Projection...

Tip

61md10 infocus daek picture


I just replaced my Bulb and bought it on E-Bay for $199.00 including shipping. Looks like a new one!!!!!! A new bulb WILL fix a dark picture on this unit.

on Jan 04, 2009 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

I have an InFocus Screenplay 61 in. DLP TV. For most of the time, it won't turn on except for the blue buttons on the TV itself. Sometimes, however, the TV would work for a couple of minutes completely...


The tv projection Lamp inside tv now like 1 1/2 or 2 years already?Tv on and in used every day 4 or 5 hours every day?Yes,this problems,the tv projection Lamp live are ending.Replacement of the tv projection Lamp,tv will work again.

Jun 07, 2011 | InFocus ScreenPlay 61" Rear Projection...

2 Answers

61md10 front panel controls lit uo, but the TV does not respond


With a non responsive remote that would be inpossiable you need to replace the control board inside around $100 bucks then you can have a good tv again but to get to the service menu your controll has to be working.

Aug 19, 2009 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

Infocus 61md10 ScreenPlay projects "BLUE PEOPLE"...HELP!


sounds like the color wheel isnt spinning at the right index speed, most likely due to bad bearings in the color wheel.

Jul 10, 2009 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

InFocus ScreenPlay SP61md10 (same as RCA HD61THW263)


I hope you are still under warranty. This is usually a problem with the main DLP chip seating properly on the board. I have rarely been able to correct this without getting a new engine board and DMD (digital mirror device).

Jul 15, 2008 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

Screen going off and on


I Had the same problem. I removed the lamp and found the wires for the cooling fan had got hot and the protective cover missing in spots bare wires were close enough to short Itaped them up reinstalled the lamp and it is now working. Don't know how long it will last so I'm ordering a new lamp assembly.Just in case,

Oct 23, 2007 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

NFocus ScreenPlay 61md10 61 does not recognize remote


on the universale remotes it tells you on the back of the package what tvs it will and wont work with.

Oct 20, 2007 | InFocus ScreenPlay 61" Rear Projection...

Not finding what you are looking for?
InFocus ScreenPlay 61" Rear Projection HDTV Logo

494 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Televison & Video Experts

Donni Steen

Level 3 Expert

659 Answers

Brad Brown

Level 3 Expert

15478 Answers

rostit

Level 3 Expert

495 Answers

Are you an InFocus Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...