Question about Linksys WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2)

2 Answers

My lan ports only output 10mps

The LAN ports on my Linksys wrt54gx-SRX 200 wireless router only send/receive @ 10mps not 100.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 742 Answers

1. Click Start => Settings => Network Connections
2. Right click on your LAN connection and click properties
3. Under General Tab, click the configure button to configure your Ethernet adapter
4. In the dialog box that appears, click the Advance Tab
5. Under Property, scroll down to SPEED and Duplex and set the property to 100Full

However, you can set it to its default value: Autonegotiation. It you have switch or hub that runs on 10mbps, it should run at 10 and not 100mbps

Posted on Jul 30, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

Its like someone have entered the http server on the router. login on to router and search for lan speeds or reset the router to default.

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Linksys 64bit passphrase


The passphrase is a phrase you create instead of using hex numbers (phrases are easier to remember than hex numbers) to setup the wireless encryption key.
To configure the Linksys wireless setting, connect a LAN cable from the Linksys LAN port to the computer's LAN port. Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
Then go to the wireless settings and configure the SSID and WPA or WPA2 encryption.
Use a passphrase to setup the encryption key

To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Nov 08, 2010 | Linksys WRT300N Wireless Router

1 Answer

Setup a linksys wireless router, unable to access admin webpage using 192.168.1.1, and reset button didn't work either.


Use an Ethernet cable to connect between one of the LAN ports on the router (not the WAN port) to the network-port on your computer.

On your computer, click Start
Click Run
Type CMD
Press ENTER
Type IPCONFIG
Press ENTER
Look for a line of output something like:
Default Gateway . . . . . . . . . : 192.168.32.1
Start Internet Explorer
Click Tools
Click Internet Options
Click Connections
Click LAN settings
Click to remove *ALL* the check-marks.
Click OK
Click OK
Take that '192.168.xxx.yyy' IP-address, from above,
and enter http://192.168.xxx.yyy into the input-area.
You should now see the router's "login" page.

Aug 19, 2010 | Linksys ULTRA RANGEPLUS WIRELESS N GIGABIT...

1 Answer

LInksys WRK54g-wireless connection works fine, but cannot get LAN


You might have faulty LAN ports on your router or your network cable is bad.

Jan 23, 2010 | Linksys Wireless-G Broadband Router

1 Answer

All lights blinking at once cant detect srx 200 device#wrt54gx


I would suggest to hard reset the router once. All lights flashing at once is not good news.
Thanks Ranjit

Nov 03, 2009 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Linksys Wireless-G not connecting to internet


Make sure you are plugging the SMC into the WAN port on the Linksys router and not the LAN ports.  Your internet connection (which is your SMC) should always plug into your WAN port on the Linksys.  Any computers that you may need to plug in, like Desktops that are "wired" and not "wireless", should plug into the LAN ports on the Linksys.  If you are not using the WAN port on the Linksys for your SMC modem, then that would explain why you cannot get to the internet on wireless or wired computers.
Here's why you are getting the "low connectivity" message:

Computers don't understand why the Internet is connecting or not connecting...so the "low connectivity" message you keep receiving has nothing to do with your wireless signal strength.   To a computer NIC, "low connectivity" means your network adapter could not find a DHCP server and receive a valid IP address.  When this happens, your network adapter assigns an IP address to your computer in the following range...169.254.0.0, and will display the "low connectivity" message until it is able to receive a valid private IP address from the DHCP server.  You can verify this by going to START | RUN and typing "cmd" (without the quotes), then hit ENTER.  A black box will pop up....then type "ipconfig" (without the quotes) and hit ENTER.  This will show you your IP address, subnet mask, and gateway address, and you can verify that your IP address is in the 169.254.0.0 range.  A valid private IP address is typically in the 192.168.0.0 range, but could also be in the 10.0.0.0 range, or the 172.16.31.0 range.    Also, make sure you have DHCP server enabled on the Linksys router for the LAN.  This will ensure your "wired" and "wireless" computers receive a valid IP address.  
The WAN port on your Linksys router should be configured to "Obtain an IP address automatically using DHCP".

Cheers!

Apr 19, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Can only get a 10 meg when connected via cable to srx 200


The speed of your wireless adapter maybe up to 54 Mpbs only, check the wireless adapter that you have if it is 802.11 G its set to 54 Mbps only however if your using 802.11 N the speed of the adapter is around 300 mbps of connection.

There's a settings on the router that you can lock WAN port speed to around 10/100/1000

Note: To have a 300 Mbps of connection you should set the wireless settings of the router to WPA2 and AES with bandwidth of auto 20/40

Mar 26, 2009 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Broken Ethernet Port


You say "your Ethernet Port" (= LAN port)
If unavailable try using any USB to rj45 adapter and you can use any USP port.
Check this device:Linksys - USB200M - Compact USB 2.0 10/100 Network Adapter (20 $?) or similar

Dec 28, 2008 | Linksys Wireless-G Broadband Router

2 Answers

Lan


Hi,

If you are referring to the Ethernet cable, initially, it can then be presumed that your computer then has no LAN port. What would be required is purchase and installation of an add-on networking card. Although it is quite rare for most modern desktops not to have a built-in LAN port. The image below is an example of an add-on PCI LAN card
562638f.jpg
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Nov 08, 2008 | Linksys Wireless-G Broadband Router

2 Answers

Linskys WRT54GX ver.2 with SRX


better to reset the passphase of your router. You need to get into the admin page of the router's webpage. just follow the 'how tos' in the manual. hope this helps

Oct 17, 2008 | Linksys Wireless-G WRT54GX Router...

2 Answers

Dual Routers?


Disable DHCP in the router. Connect the modem to a LAN jack on the router. You'll have 3 LAN ports. If you need more ports, buy a hub. (You can change the default IP address on the Linksys, but you can't forward through 2 NATs.)

Apr 27, 2008 | Computers & Internet

Not finding what you are looking for?
Linksys WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2) Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...