Question about Philips Televison & Video

1 Answer

Philips 19pfl5422d/27 same sound problem

I have the same problem with these tvs. I actually inherited 4 of them that are having the exact same problem, bought about a year and a half ago. There were approx. 25 with the same issue though! I cannot believe that is a coincidence, so I figure there must be some way to fix it. The sound comes on with a large amount of static, and then sometimes no sound comes out for minutes at a time. If I go into the sound options and turn all the settings all the way down (under the Personal settings option), it is a little better, until the sound goes off again. I have soldered boards for computers before, and I believe I could fix it myself. I don't want to pay for repair, and since I have a few of them and I got them free, I'm not losing any money - but I hate to throw them away if they can be fixed!!!

Any help would be much appreciated.

Posted by on

  • leeniebuns Jul 31, 2009

    Thank you so much dsacco for the advice. I'm taking a look for the service manual, but I'm wondering if anyone has reported this specific issue before, because it is evidently a flaw in the manufacturing. If so, someone might be able to point out exactly where to look and on which board.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

This should be a piece of cake for you.
The best thing you need is a Service Manual for the TV. Costs about less than $20 over the internet. It will have schematics, diagrams and part number list for the TV. It's the best thing to use for diagnosing the problem on the audio board. It maybe something simple like a conductive adhesive material for a heat-sink that spread to other contacts on the board.

Posted on Jul 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Philips TV turns off and on and has a very bad picture


Check electrolytic capacitors on the power supply board for bulged tops.

May 10, 2010 | Televison & Video

3 Answers

Phillips 19" flat screen


OK, I had the same problem and I fix it 100%.
The power board is ok, the lamps are ok, don't waste time there.
Just open the TV, remove the shield of the mainboard, and in the side where are the wires from the power board, there are many capacitors, check them, in my case 4 were "fat", exploded.
I had to change 9 to make shure, and that's all !!!

Saludos de Mexico!!!

Feb 21, 2010 | Philips 19PFL5422D Television

1 Answer

My philips 19pfl5422d tv turn on then turn off with no picture how do i fix it.


Power supply board is dead.Replaced the power supply board.Tries Shopjimmy.com,Ebay.com to buy a refurbish power supply.

Feb 15, 2010 | Philips 19PFL5422D Television

1 Answer

I wna the manual for 19PFL5422D philips 19 inch


Sorry, but you wont find service manuals for LCD's. You may find a flow chart but that's about it. We,as technicians don't need manuals for these anyway. If you want to let me help, just send me an e-mail with your problem or just re-post here.

Oct 18, 2009 | Philips 19PFL5422D Television

2 Answers

Philips tv model id: 19pfl5422d/27 terrible loud sound


The issue is 4 1000uF X 10V on the main board under the shield close to the connector that from the power board. you will see them because they will be FAT( exploded)

Feb 28, 2009 | Televison & Video

1 Answer

No menu access without remote


the channel selection buttons are supposed to pressed at the same time. the menu page will appear on your screen, use your volume for moving the pointer. entering using one of the volume button. thanks

Dec 28, 2008 | Philips 27PT543S 27" TV

1 Answer

My tv sound ok, crt high voltage ok,channel number display ok


check for a resistor rated around 220kohms somewhere around the flyback area. i have never worked on this model tv before so i cant give you an exact part number on the board but had the same problem with sharp tvs

Nov 20, 2008 | Philips Magnavox 27MS343S 27" TV

1 Answer

Philips flat screen TV MODEL ID 19PFL5422D/27


I bought the television less than a year ago, so I called Philips Magnavox and they asked for the serial and model numbers. Next thing I know they asked for my name and address and Philips is sending a brand new television to replace it !!! The new one should arrive in about ten days. How's that for service? I'm very happy that I bought Philips and I will do so again. So don't forget to keep all the paper work that comes with your new televisions,especially Model and Serial numbers ! Thanks for asking , Debbie Hoffman

Aug 17, 2008 | Philips Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

610 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...