Whats causing a E66 washing machine code - Cell Phones

Family error code E60 is visible to customers and (could be E61,E62,E66,E68 and E69 only visible in service mode) means problem with heating phase.
Possible failures : heating element faulty, NTC sensor faulty, PCB faulty, wiring.

Dado

Family error code E60 is visible to customers and (could be E61,E62,E66,E68 and E69 only visible in service mode) means problem with heating phase.
Possible failures : heating element faulty, NTC sensor faulty,
PCB faulty, wiring.


Dado

Hello friend, thank you for your post!
I understand that your Frigidaire washer is displaying an error code of "E66". An "E66" code stands for heating element relay failure. This could be a problem with your heating element or control panel. In order to properly locate the issue you would need to disassemble your washer and test each electrical component to assure it is providing an accurate reading. This is not a simple DIY job. I would recommend having a professional technician for proper diagnosis and repair. I hope this information is helpful. -Matt

Family error code E60 is visible to customers and (could be E61,E62,E66,E68 and E69 only visible in service mode) means problem with heating phase.
Possible failures : heating element faulty, NTC sensor faulty, PCB faulty, wiring.

Dado

HEATING ELEMENT RELAY FAULT... THAT'S ERROR CODE ON YOUR MACHINE

the heater element is faulty

http://bastlman.wz.cz/2010/08/AEG-Lavamat-error-codes.html

E66 error is for "heating element relay failure". You need to replace the "water inlet valve". If you can post the model number off of the machine I can direct you to the part you will need.

Can you tell me what make this machine is? As it sounds like a heater problem??