Question about HP Pavilion Media Center m9340f Desktop PC

1 Answer

I just purchased a slightly used HP m9340f Pavilion Media Center PC. It won't boot up... it just beeps. Nothing shows on the monitor.

Posted by on

  • Alun Cox May 11, 2010

    What is the sequence of beeps as these are coded to specify different problems.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,992 Answers

The beeps normally are a code which tells you what problem has been detected and is keeping the computer from starting. You can find information about interpreting the beep codes and what to at HP's site here. The most common causes of beeps and no start is bad memory or video. I'd suggest making sure the memory modules are firmly seated in their sockets. It's possible that poor connections are keeping the memory from being properly detected.

Posted on Jul 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP Pavilion a 1245c won't boot black screen no beeps constant running fan


sound to me like a video problem. no beep codes, you hear the fan going so it must be posting. could you try with other monitor and or cable? is there power to monitor? reseat cable at both ends( monitor+ pc)

Nov 02, 2012 | HP Pavilion a1720n PC Desktop

1 Answer

HP Pavillion won't recognize Plug n play devices


Look into the Bios or System Setup and make sure Plug and Play is enabled. When you turn the system on notice what key it says to hit to get into the Bios or System Setup. Hit that key and check the Plug and Play to be sure it is enabled.

Apr 24, 2012 | HP Pavilion Media Center m9340f Desktop PC

2 Answers

Installed a Graphics card EVGA 6200 AGP 8X in my PC HP Media Center PC m370n now keeps showing failure notice


Did you install the drivers for the Graphics Card before you plugged the card into the computer? If not, remove the graphics card and reboot using your old video connection, install the driver then install the card and plug your monitor into the newly installed card. If you still have an issue try booting into safe mode.

Mar 19, 2012 | HP Media Center Photosmart PC (M7160N) PC...

1 Answer

HP KT334AA Pavilion Media Center M8530F will not POST. No beeps or monitor activity. Fans spin and that's it. The system froze and I had to manually shut it down, now nothing. Monitor works on another...


hello, below are few trouble shooting steps you can try.
1: open up the tower case and reset BIOS by removing the battery from the motherboard and switching jumper position. try turning on computer.
2: remove RAM sticks from the PC power on PC see results for any change, if no chnage stick one stick back at a time(if you have more than one) and then try it again.

post your results back and we will look to further troubleshoot the issue.

I hope this helps

regards
Amar Sondhi

Dec 05, 2009 | HP KT334AA Pavilion Media Center M8530F...

1 Answer

HP Pavilion Media Center PC model m8457 with a blank display


You may have a boot problem. When you turn it on immediately press the "F8" key repeatedly until you get an option to select an option to restore the hard drive or boot in the safe mode.

Nov 04, 2009 | HP Pavilion Media Center m8425f 2.66GHz...

1 Answer

Video is scrambled


It's probably something to do with your video card. The card could need replaced or there could be a bent pin in the plug. Check for the bent pins first.

Nov 19, 2007 | HP Pavilion Media Center TV m7360n...

Not finding what you are looking for?
HP Pavilion Media Center m9340f Desktop PC Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...