Hi I would like to know how to wire up a kam keq 15 dual band graphic equalizer to my home hifi thanks

Most of the time what goes out in a graphic EQ is the power supply. I would check that out first before moving forward.

Simple, how much instruction would you need? Check here http://www.manualslib.com/manual/210377/Art-355-Eq.html

If you have the in's and out's reversed you may be just hearing bleed-through. Or the level settings are not right. Read. Maybe the Range switches.

http://www.retrevo.com/support/Behringer-FBQ3102-manual/id/23281bh440/t/2/

Hi, This will be pretty straightforward hopefully. all you should need to do is connect ANY " LINE OUT " from the mixer into the " LINE IN " or anything marked audio in on the back of equalizer and you should be in business. Thank you for using FixYa, and I hope this helps, Be sure to write back if this helped or even if we need to be of more assistance,ggood luck Prodzilla

In a closet out of the way...

Click on MANUAL DOWNLOAD

LOOK PAGE 4 INTO THE PDF FILE!!!!

http://www.pyramidcaraudio.com/sku/903G/10-Band-Half-Din-Power-Booster-Graphic-Equalizer-Amplifier-200-Watts#

top left - orange.....goes to aux or memory wire
top right - blue.......goes to the remote wire used with amps
bottom left - black.......goes to the ground wire
bottom right - red........this goes to your hot wire

HOW TO HOOK UP EQUALIZER TO STEREO 10 BAND OPTIMUS

take output from left and right from equalizer and go to line in any two channels inputs in peavey mixing console and adjust your level with faders and other control knobs.

if the Eq has enough jacks to run every thing, that would go In to Eq an out to receiver, you were told correctly, for example cdplayer out - to Eq In - Eq- out to Receiver in