Question about Uniden TRU8885-2 Cordless Phone
Uniden cordless phones
The solution above doesn't work with the TRU8885
Posted on Jun 01, 2008
Place handset in base, press menu, press vol button
select HS registration,
on handset press & hold # for 2seconds
Posted on Dec 17, 2007
SOURCE: Uniden Cordless handset
we purchased the uninden 3 pack bundle they worked fine when installed now one handset will light up but the screen comes up blank and the handset won't work also if this can be corrected i would like to know how to purchase one extra hand set and charger
Posted on Oct 03, 2008
SOURCE: Handset Fails to Register
It is quite possible that you'll need to go into the menu settings on your base-unit and reset the unit or restore factory default, whichever option it gives you. Also, look in the menu on the phone to see if there is an option to reset the handset also. After resetting the unit and/or handsets, try to register the handsets again, one at a time. If that still does not fix the problem, you may have handsets that are not compatible with your system, or your system may not be able to support that many phones. However, if you have the right handsets, and your system can host that many handsets, then I'm confident that resetting the unit and re-registering your handsets should fix your problem.
Hope this helps! Have a nice day!
Posted on Nov 23, 2008
If the handsets are not currently registered to any base, the SYSTEM RESET menu won't appear.
If the TCX905 handsets in question are actually expansion handsets from another Uniden Phone System, they are not true TCX905 handsets. To verify, remove the battery cover and battery, then look at the inside label. If it lists the model of a TRU9xxx phone system, your handsets are NOT TCX905.
Uniden unfortunately has programmed the expansion handsets from SINGLE LINE TRU9xxx phone systems to NOT REGISTER against the TRU9466. (Those same handsets register fine against predecessor model TRU8866 though).
Posted on Mar 19, 2010
You can downlaod the manual from uniden in pdf form.
the -4 or -5 refers to how many handsets you set. The 1580 is the actual model number.
To register I think all you do is place them on the master pad once then on their own charger stations. On some models they come all done so you just plug them in charge them up and use them.
Posted on Mar 23, 2010
1-Press the hangup key (represented by a red phone) and the "#" key at the same time for at least five seconds.
2-Select "Deregister hs." Choose the handset and press the "Select" key (which also shows an envelope for messages).
3- Choose "Yes" to confirm deregistration. The phone clears its registration information from the base and deletes the link from its memory. The message "Handset not registered -- place handset on base to register. See owner's manual for help" now shows on the display. If you are out of range of the base, "Out of range" shows.
4-Place the handset in the base charging cradle. The phone automatically selects a new security code from those stored in the base.
5-Make sure your phone is working again after "Registration Complete" shows on the display
Hope this will Help. Thank you for using Fixya !!!
Posted on Nov 17, 2010
Tips for a great answer:
Mar 27, 2011 | Uniden 5.8GHz Cordless Phone
Mar 23, 2010 | Uniden DECT15805 Cordless Phone
Oct 29, 2009 | Uniden DECT 6.0 Cordless Telephone...
Aug 30, 2009 | Uniden TRU9496 Corded / Cordless Phone
Jun 14, 2009 | Uniden 5.8GHz Dual Cordless Phone
Sep 30, 2008 | Uniden DECT 6.0 Cordless Telephone...
Jun 26, 2006 | Uniden TRU8885-2 Cordless Phone
Apr 29, 2014 | Uniden TRU8885-2 Cordless Phone
215 people viewed this question
Usually answered in minutes!