Question about Panasonic PT-47WX49 47" Rear Projection Television

1 Answer

No picture on pt-47wxc43g

My 47 rear projection panasonic tv turned off on my kids when playing a video game ,blinks code 3 times or 3 flashes then stops and flashes 3 times again,does anybody no the part # to fix it,i found alot of help from web sites but can seem to come up with the part # any help would be great thanks chris

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 167 Answers

Call a good TV Tech and have him check c509 ECWF2474JSR .47uf -J- 200v It's the yoke return cap. Also check the convergence amp IC's. If they need to be replaced use the STK 392-120 instead of the original STK 392-110.

Posted on Jul 30, 2009

  • Mark Wakefield
    Mark Wakefield Jul 30, 2009

    Call a good TV Tech and have him check c509 ECWF2474JSR .47uf -J- 200v It's the yoke return cap. Also check the convergence amp IC's. If they need to be replaced use the STK 392-120 instead of the original STK 392-110.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red power light blinks, no picture. will not turn on Panasonic 47 inch rear projection


You would need to count the blinks as that is a error code-----3 or 5 blinks are the most common.

Let me know if I can help.

Aug 08, 2011 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

I have a pt-47wxc43g panasonic projection tv and when i turn it on the red light blinks three times and it does not turn on.


Hi,
Three times red light blinking indicates problem of convergence output chips are bad, tv has 2 chips that need to be replaced.
Let me know if you are handy with electronics stuff repair and can replace/ solder parts in circuit board to provide you technical info OR local tv repairman will do this job for you.
Thanks.

Dec 27, 2010 | Panasonic PT-47WX49 47" Rear Projection...

2 Answers

What are the error codes for a Panasonic PT-47WX 42 TV


Hi,
3 times LED blinks in Panasonic PT-47WX42 shows problem with convergence out chips failure as this tv has two big black ICs STK392-110 as convergence output, replace them to fix tv problem.
Click Part Store to see an image of required chip and price info.
Local tv tech is recommended if you have no experience of working in tv circuit boards.
Thanks.


Apr 18, 2010 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Replaced convergence chips, have new problem


Did you check the 2.2 ohm 2watt resistors? As often one or two will blow when the old ICs fail. The 3 blink error is indicating a problem with the convergence circuit still.

Jun 19, 2009 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Small strip of video (about 3 in wide) in the middle of the scree


Just to be sure that I send you in the correct direction, does this strip look like a shrunken picture with no height? In other words is it a horizontal bar?

Thanks,
Dan

Mar 23, 2009 | Panasonic PT-47WXC43 47" Rear Projection...

1 Answer

Panasonic projuction screen tv.


3 blinks is the error code for the convergence ICs. You need to replace both STK392-110 convergence ICs. You can get replacement ICs at the following link and they provide installation instructions with pictures.
http://servicemanuals.vstore.ca/

Oct 12, 2008 | Panasonic PT-47WX42 47" Rear Projection...

1 Answer

Panasonic model# PT-47WX547 is not working


how many times does the LED blink ? Thats a error code.

Jun 29, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Panasonic PT -47WXC43G 42 inch TV


replace the convergence amp ICs both of them. They cost about 15.00 each

Mar 09, 2008 | Panasonic PT-53WX42 53" Rear Projection...

Not finding what you are looking for?
Panasonic PT-47WX49 47" Rear Projection Television Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...