Question about Maytag DWU9962 Dishwasher

1 Answer

Soap Not all of the soap dispenses. Some is left in the dispenser of the dishwasher after the cycle is finished.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 45 Answers

1. You have poor pressure coming from the pump. fix this by removing the racks from dishwasher and removing/cleaning the intake filter to the pump. It is located on the floor of the dishwasher. Use a wet vac if you have it to clean the entire area and anything that might be stuck down in the pump. you would be suprised what you find doen there. Don't be afraid to remove a few phillips screws to remove a cover to the impeller. After this all should work better/cleaner AND soap dish will be washed out too.

2. make sure dishes are not stacked to block the soap dish from water spray arms.

3. remove spray arms and clean them out, especially the spray tips. Hard objects will stick in their spray tips.

Good Luck

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a whirlpool gu2400 dishwasher. The spring loaded soap dispenser door does not open during the wash cycle to release the soap.


Whirlpool dishwashers use a wax motor or a solinoid to release the door at a specific time during the cycle. So for proper cleaning the soap cup is nessesary . The part isn't that expensive and fairly simple repair.

Dec 30, 2014 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

My dishwasher is leaking, and it runs the complete cycle, but the soap is still in cup dispenser when cycle is finished


Hi,


There are three common problems that cause the Soap Dispenser or Cup not to open. I have a tip that will explain these problems in detail....

Dishwasher Repair Problem Detergent Cup does not Open

heatman101

Aug 10, 2010 | Kenmore 24 in. 15182 / 15189 Built-in...

1 Answer

The soap dispenser only opens sometimes. When the dispenser doesn't open the soap is in a solid cake inside dispenser.


IF DISPENSER IS CLOSED WHEN FINISHED COMPLETE CYCLE .
THERE ARE TWO WAYS THAT D/W'S
OPEN THE DISPENSER ONE IS BY WAY OF TIMER TRIPPING LATCH, OTHER IS BY WAY OF BIMETAL IN THE DOOR. THE SOLID IS BECAUSE OF THE MOISTURE ABSORPTION OF THE SOAP. THIS IS ASSUMING THAT YOU HAVE NOT BLOCKED THE DISPENSER DOOR WITH SOME OBSTRUCTION.

Feb 18, 2010 | Frigidaire 24 in. FDB1050REC Stainless...

1 Answer

Soap left in dispenser


Hi Vneck,

I'm Harvey the Master Plumber.

Your problem is: When you run a cycle, there is soap left in the dispenser at the end of the run.

Do you use a powdered soap? This can be a problem for some d/w. Sometimes it occurs as a d/w gets older. Try a liquid d/w soap. Make sure it says "dishwasher" on it.

Feel free contact me again!
Please give me a rating here at fixya before you sign off
Thank you,
Harvey your Master Plumber

Sep 21, 2008 | Dishwashers

2 Answers

Soap dispenser flap not opening


Not a solution but exactly the same problem. I should have sent the machine back (I bought mine about 2008 too) but by now, 2010, the machine is a complete waste of time and money. The soap dispenser fails to open every time, wasting money, water and my patience because I then have to hand wash after all. will try the suggested oil trick, but it was obviously a bad design to start with.

Jul 20, 2008 | Bosch 22 in. SKT5102 Free-Standing...

2 Answers

Soap dispenser doesn't open for wash cycle


I noticed you didn't rate out chat and saw that your problem was posted. I'm happy to continue to help you if you encountered problems or were not happy with the solution in your chat session.

Jul 07, 2008 | Frigidaire FDS251RJ Free-standing...

1 Answer

Dishwasher Issues


I would try using a different soap or less of your current soap.

Jun 21, 2008 | Maytag 24 in. MDB4100 Built-in Dishwasher

2 Answers

Soap door won't open during wash cycle


its either the dispenser or the timer/pcb.

Mar 01, 2008 | Dishwashers

Not finding what you are looking for?
Dishwashers Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...