Question about Delphi Roady XT XM Radio Receiver
I moved a few months back and have not tried to reinstall my Delphi Roady XL until today. Now kit will not power up at all. Any solutions?
SOURCE: Delphi Roady XT Quit Working
This sounds like the problem I posted about the a/c adapter. The radio doesn't get enough power because the scr in the a/c adapter is failing.
Posted on May 14, 2007
as long as the voltage of your supply is DC, 6V and has the right POLARIZATION on the power jack. (ie, make sure the center pin matches what the receiver expects... if it's backwards, you risk blowing up your receiver) All of these must match exactly to what the reciever expects.
as for Amp rating, the minimum you must be able to supply is 600 mA. so a 1300mA supply will work just fine!
Posted on Apr 08, 2009
SOURCE: Roady XT "Antenna" problem
one of 3 things, either your antenna is not insight of a skies view to receive the signal, or its wire is broken at the antenna, but if you remove the antenna connection frequently it pulls the center wire out of the connection on the end that fits into the radio when its plugged in push on the conductor at the back of the plug and see if this helps,alos if connection is loose take a safety pin and carefully between the outer plug case ans the ground fingers around the center pin push these in so you get a better ground, and lastly try another substitute antenna, I have re-soldered my connections numerous times to fix this issue, delphi doesn't make a very rugged product, good luck
Posted on Nov 17, 2009
I was thinking how can I trick the cassette into keeping the cassette in there because every time I put it in, it just came right back out
This is what I did
Go and find a real cassette and cut out a little piece of the cassette tape and set that aside
Every cassette is different so find a way to attach tape from a real cassette to the cassette part of the cassette adapter
You need to attach the tape so it is flat over the head of the cassette just like in a real cassette, which is the part where the music is transferred, once u get it over the head the cassette deck will think it is a real cassette and it will stay in the deck, the tape doesn't even need to be perfectly flat like in a real cassette tape, it can be all messed up and it will still work but flatter is probably better, so you are just tricking the deck into believing that it is a real cassette, it worked for me and hopefully it will work for you, tell me how it works out
Posted on Mar 10, 2010
Tips for a great answer:
Nov 17, 2009 | Delphi Roady XT XM Radio Receiver
Oct 06, 2009 | Delphi Roady XT XM Radio Receiver
Aug 30, 2009 | Delphi Roady XT XM Radio Receiver
Jun 01, 2009 | Delphi Roady2 SA10085 XM Radio Receiver...
Mar 01, 2008 | Delphi Roady XT XM Radio Receiver
50 people viewed this question
Usually answered in minutes!