Question about Maytag Bravos MTW6600T Top Load Washer

2 Answers

Maytag washer model # mtw6600tq0 error code f50

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 3,740 Answers

Two things cause the dreaded F50 code. (motor)

1. The machine control
Bravos MTW6600T

http://www.repairclinic.com/SSPartDetail.aspx?s=t-Maytag+MTW6600T+-%3d%3di1469076&PartID=1469076

2. The stator

Item 17 this link:

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5136402&diagram_id=1303991#d1303991

The upper cover of the stator comes in kit form and has been known to also cause the dreaded F50 code.

http://www.appliancepartspros.com/part_details.aspx?part_id=4327312&rdr=%2fpartsearch%2fmodel.aspx%3fmodel_id%3d5136402%26diagram_id%3d1303991


All of them are some what costly repair(s) in my book but cheaper than a new machine.

I have yet to change a Stator for an F50 Code.... but have changed a lot of machine controls (most often failure) and stator cover kits (occasional failure) that corrected the problem.

Just being honest. Thanks for using FixYa!

Kelly

Posted on Feb 16, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Well, before you go running to your nearest parts supplier you may want to power cycle the unit. Let the controller rest for 2min and re-apply power. Run rinse/spin setting and observe the cycle.If the tank fills, empties and the motor operates,that rules out the motor Stator. Observe the full cycle.. 24min. If any further
error occur, check any inputs into the Controller before you change it.

Posted on Oct 06, 2011

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

kel1guy2002
  • 3740 Answers

SOURCE: Washer starts, then shows fault code

Two things cause the dreaded F50 code. (motor)

1. The machine control
Bravos MTW6600T

http://www.repairclinic.com/SSPartDetail.aspx?s=t-Maytag+MTW6600T+-%3d%3di1469076&PartID=1469076

2. The stator

Item 17 this link:

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5136402&diagram_id=1303991#d1303991

The upper cover of the stator comes in kit form and has been known to also cause the dreaded F50 code.

http://www.appliancepartspros.com/part_details.aspx?part_id=4327312&rdr=%2fpartsearch%2fmodel.aspx%3fmodel_id%3d5136402%26diagram_id%3d1303991


All of them are some what costly repair(s) in my book but cheaper than a new machine.

I have yet to change a Stator for an F50 Code.... but have changed a lot of machine controls (most often failure) and stator cover kits (occasional failure) that corrected the problem.

Just being honest. Thanks for using FixYa!

Posted on Feb 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My kenmore elite oasis washer model # 110.2703 shows code F-50


The F50 error code indicates that the RPS (rotor position sensor) detects no motor rotation. Check to see if the basket spins freely. If not, you could have an item caught between the outer tub and the inner spin basket. A toy or other item underneath the washer could also prevent the basket from spinning and would result in this F50 code.

If the basket spins freely, you could have a wiring failure that would prevent the motor from spinning.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

May 25, 2010 | Kenmore Oasis 27042 Top Load Washer

1 Answer

F50 fault on maytag MTW6500TQ washer after apprximately 1 minute of startiong cycle


Two things cause the dreaded F50 code. (motor)

1. The machine control
Bravos MTW6600T

http://www.repairclinic.com/SSPartDetail.aspx?s=t-Maytag+MTW6600T+-%3d%3di1469076&PartID=1469076

2. The stator

Item 17 this link:

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5136402&diagram_id=1303991#d1303991

The upper cover of the stator comes in kit form and has been known to also cause the dreaded F50 code.

http://www.appliancepartspros.com/part_details.aspx?part_id=4327312&rdr=%2fpartsearch%2fmodel.aspx%3fmodel_id%3d5136402%26diagram_id%3d1303991


All of them are some what costly repair(s) in my book but cheaper than a new machine.

I have yet to change a Stator for an F50 Code.... but have changed a lot of machine controls (most often failure) and stator cover kits (occasional failure) that corrected the problem.

Just being honest. Thanks for using FixYa!

Kelly

Oct 13, 2009 | Maytag MTW6500TQ

1 Answer

Maytag Bavos MTW6300TQ0


Two things cause the dreaded F50 code. (motor)

1. The machine control
Bravos MTW6600T

http://www.repairclinic.com/SSPartDetail.aspx?s=t-Maytag+MTW6600T+-%3d%3di1469076&PartID=1469076

2. The stator

Item 17 this link:

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5136402&diagram_id=1303991#d1303991

The upper cover of the stator comes in kit form and has been known to also cause the dreaded F50 code.

http://www.appliancepartspros.com/part_details.aspx?part_id=4327312&rdr=%2fpartsearch%2fmodel.aspx%3fmodel_id%3d5136402%26diagram_id%3d1303991


All of them are some what costly repair(s) in my book but cheaper than a new machine.

I have yet to change a Stator for an F50 Code.... but have changed a lot of machine controls (most often failure) and stator cover kits (occasional failure) that corrected the problem.

Just being honest. Thanks for using FixYa!

Sep 14, 2009 | Maytag Bravos MTW6600T Top Load Washer

3 Answers

Maytag Bravo Washer flashes F50 code


Most likely a bad machine control,can also possibly be a motor per whirlpool but I have never had to change a motor,changed a lot of machine controls. 

Sep 01, 2009 | Maytag Bravos MTW6600T Top Load Washer

1 Answer

AF On Dryer


I went to Lowe's where I bought the washer and dryer and asked them about it. They told me what to do

May 11, 2009 | Maytag Bravos MTW6600T Top Load Washer

1 Answer

Kenmore Elite Oasis HE top loading washer model #110.27082602 gives me error code F50 and doesn't spin. Other blogs tell me that it is possibly a main control board. What do you think?


The F50 error code indicates that the RPS (rotor position sensor) detects no motor rotation. Check to see if the basket spins freely. If not, you could have an item caught between the outer tub and the inner spin basket. A toy or other item underneath the washer could also prevent the basket from spinning and would result in this F50 code.

If the basket spins freely, you could have a wiring failure that would prevent the motor from spinning.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 15, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

F 50 fault code and will not spin


f 50 is a control issue needs to be replaced 3 screws in back of control panel pull top forward control is on the right part #w10189966 its about $160 to $190 easy to change

Mar 09, 2009 | Maytag Bravos MTW6600T Top Load Washer

1 Answer

Washer starts, then shows fault code


Two things cause the dreaded F50 code. (motor)

1. The machine control
Bravos MTW6600T

http://www.repairclinic.com/SSPartDetail.aspx?s=t-Maytag+MTW6600T+-%3d%3di1469076&PartID=1469076

2. The stator

Item 17 this link:

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5136402&diagram_id=1303991#d1303991

The upper cover of the stator comes in kit form and has been known to also cause the dreaded F50 code.

http://www.appliancepartspros.com/part_details.aspx?part_id=4327312&rdr=%2fpartsearch%2fmodel.aspx%3fmodel_id%3d5136402%26diagram_id%3d1303991


All of them are some what costly repair(s) in my book but cheaper than a new machine.

I have yet to change a Stator for an F50 Code.... but have changed a lot of machine controls (most often failure) and stator cover kits (occasional failure) that corrected the problem.

Just being honest. Thanks for using FixYa!

Feb 21, 2009 | Maytag MTW6500TQ

Not finding what you are looking for?
Maytag Bravos MTW6600T Top Load Washer Logo

2,636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...