Question about 2wire (1000-000057-000) Modem

1 Answer

Internet Not Working. Light on box blinks red then green. Gateway

I have a gateway router and all the lights are green expect the internet light, that light blinks red then blinks green.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 89 Answers

That means the box needs to be reset if its going red like that its glitching if the reset doesn't work then something is wrong and i would get it replaced hope this helps

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wifi Setup gateway is off don't know what it means. When wifi is working why does it kick me off then broadcast saved and secured??


Routers are rather sophisticated to se up.
It would take far too long to deal with all the possibilities here.

Your "Gateway" is the port to your Internet or Internet gateway.
Often se for port 192.168.1.1 but several others could be used.
No Gateway to WAN means phone line or cable cut or dead or being repaired.

How To Setup Belkin N300 ADSL2 Modem Router With MTNL Internet Connection...

Sep 25, 2015 | Gateway Computers & Internet

1 Answer

Im connected to modem but not internet


Make sure internet light is green and not red. If it is not green it has not authenticated.

Mar 03, 2013 | BT 2Wire Gateway BT2700HGV Home/Office...

2 Answers

WHAT LIGHTS ON LINKSYS ARE SUPPOSED TO BE BLINKING


Note that incoming traffic will cause the WAN (or Internet) light to blink even if it is 'probe' traffic trying to break in to your network. Such traffic is to be expected and is the reason you have firewall functionality in your gateway router.

On the inside, there is a bit of traffic on any LAN when the computers are turned on. Messages generated by the router itself are used to find computers and printers for a lot of different legitimate reasons.

Feb 25, 2013 | Linksys Wireless-G WRT54G Router

1 Answer

I dont know how to get wireless internet


Check the ADSL or cable modem status light. If it is solid green, it indicates that your ADSL/cable modem has a good connection. If the light is off, check modem's physical connection.

Verify that the Internet light on your wireless router is solid or blinking green. It indicates a good connection and correct wiring.

When done, log in to the web interface of your router device and check if it can obtain the IP address from your ISP or not.

If you see 0.0.0.0, the router is not obtaining the IP address. It can happen due to various reasons. Contact your ISP and ask for the details including username, password for PPPoE etc. and try to connect to the Internet again afterwards.

You may also need to configure the default gateway settings also. To configure your router device as the default gateway, reboot your PC. When done, open Command Prompt, type 'ipconfig/all' and hit Enter. Check Default Gateway

If you are still unable to browse the Internet, ping your router's connection to the PC.

The Request timed out error can occur due to two things: (1). incorrect physical connection between your router device and the PC or (2) incorrect wireless network setup & configuration. Recheck and correct the Ethernet connection between your PC and the router device.

When done, check back if you can browse the Internet or not.


***If you need any kind of technical assistance you can contact support cell

Jan 21, 2013 | Computers & Internet

1 Answer

Cannot connect to web.


Follow this steps
1. Connect the provided power adapter from the gateway's POWER port to an electrical outlet. The POWER light on the front of the gateway should be green. 2. Connect the provided gray phone cable from the gateway's PHONE LINE port to the DSL filter jack labeled DSL/HPNA. 3. Connect the yellow Ethernet cable provided with the gateway from the LOCAL ETHERNET port on the gateway to your computer's Ethernet port
With your computer completely started, verify the POWER and ETHERNET indicator lights on the front of the 2Wire gateway are green. If they are not, see "Understanding the Indicator Lights" on page 15. The INTERNET indicator light will not turn green until the gateway software has been installed and an Internet connection has been established.

Mar 22, 2011 | 2wire Computers & Internet

1 Answer

I cannot stay connected to internet, my model 2701HG-B 2wire at&t dsl will start flashing red then disconnect me from the internet or my game site, how can i get this to stay fluently connected please!


You might want to try disconnecting everything EXCEPT the power cord. If you still get the red power light (it should stay there forever) then bring the gateway to Radio Shack or somewhere they have a 5 volt DC @ 2 amp power supply and plug it in for 5 to 10 minutes and see if the power light then stays green. If it stays green then all you need is a new power supply! If not, then the gateway is fried. Mine keeps going from a solid green power light to a flashing green power light and I can hear a relay click every 2 minutes at which time a pop-up say "ethernet line disconnected". I tried new power supply etc. to no avail! It is fried after 1.5 years! No more 2wire for me!

Sep 28, 2010 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Hi i ahve a zoom modem, im not at my house right now so i don't know the version of my modem. The internet light is red and everything else is solid green, i tried restarting and holding off for 30 seconds...


u have to configure it to connect to the internet once again through ur default gateway and to look for that open a command line in windows and type ipconfig and u should see ur default gateway. then type that in ur browser and VOILA!

Aug 11, 2010 | Zoom (5590-00-03) Wireless Router (G66115)

1 Answer

Ethernet light is green but continuously blinks is there a problem with modem or ethernet cable?


no, a green light means there is a connection with the network and dns server (gateway to the internet) information is sent allow this network in bundles called packets. Each time a packet is sent the green light blinks.....sometimes when many packets are being sent in succession the light will appear solid. so i wouldnt worry, the green lights on your router and computer are normal and you should become concerned if these lights turn yellow or stop blinking completely.
Good Luck and Please Rate This Post!!!! :D

Oct 14, 2009 | 2wire (1000-000057-000) Modem

3 Answers

Power Light Is Red, Internet Light Is Green, Other Lights Off


Check cable connections.

Try unplugging router from power for five minutes.

If that does not work call Internet Service provider to check if there is a problem with their server.

Apr 10, 2009 | Actiontec GT704WG Wireless Router...

1 Answer

Where do I find the key for my Gateway modem? 2700HG-B 6044294410 SN31064303. When I try to access the internet it tells me to run the setup. It may be because I disconected it from my computer and...


try following this instructions..you key should be in the back of your modem router

1. Connection of phone line, ethernet and power adapter
2. Indicator light: POWER: green; Ethernet: blink; DSL: green; Internet: blink or red
3. Open IE beoswer.
4. address: 192.168.1.254
5. Click "Run System Setup Wizard"
6. Login with preset password: admin. Or change password: click "I forgot the password." Under question "Here’s a hint for the password wedding date", click "I still can’t remember the password.". Then Reset System Password by enter System Key which locate on back of the Router (like: [1234567890]), and your new password, then click "Submit"
7."Set Up Your 2700HG-B Gateway" screen. Keep default "Key Code". Click "Next"
8. "Time Zone". Select your time zone,then click "NEXT"
9. "Set Up Connection Info". Enter "PPP Authentication" information provided by internet service provider. "Username", "Password", and "Confirm Password", then click "NEXT"
10. Screen "Connecting" running...
11. Auto turn to screen "2700HG-B Gateway Setup Complete", click "FINISH", or "EXIT" to complete setup or "Register" to register with 2WIRE on line.

taken from
http://reviews.ebay.com/2Wire-2700HG-B-Router-Setup_W0QQugidZ10000000003443668?ssPageName=BUYGD:CAT:-1:LISTINGS:1

Sep 25, 2008 | Computers & Internet

Not finding what you are looking for?
2wire (1000-000057-000) Modem Logo

681 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Bruce Silvernagle
Bruce Silvernagle

Level 1 Expert

17 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...