Question about GE Profile JKP18 Electric Single Oven

1 Answer

Oven stopped working while cooking a meal

We have a GE flat topped electric stove (white with black top) and bought it 11/17 last year. It is just past its year warranty by several days. The model number is JBS55WOK4WW. We had been smelling something in the back of the stove like wires smelling funny off and on the last few months. We eat out alot and have not used our stove much and so when we were cooking thanksgiving meal and had the stove and oven going, the stove just quit on us halfway through when cooking. The lights/clock do not display. There is electricty coming to the stove but the only way to get the lights and display to turn on is to turn one of the stove knobs; otherwise the panel board is totally dark and doesnt display anything. When we turn one of the stove knobs all of the lights on the display light up. However, the stove wont heat up every time we turn on the stove knob to boil or cook something on top of the stove. We cant get the oven to work either unless we turn the stove knob on first and then it lights up the panel board and then we can press the oven button but the oven doesnt heat up. We are worried what is causing this and how much it could take to repair it. Thank you for any help you can give us.

Posted by on

  • 1 more comment 
  • Anonymous Mar 16, 2014

    after cooking for awhile the stove will stop working

  • Anonymous Mar 20, 2014

    have a ge stove model #jgbso7demlww oven takes long time to light and when it dose i get a fire ball how do i fix it

  • Anonymous Apr 01, 2014

    When replacing a knob on our frigidaire glass top stove, my husband unscrewed the control panel to insert the new knob. When he reassembled it, the control panel is all lit up, but the touch controls don't work. The oven light is on, but the controls nor oven work. Stove top works fine.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

It sounds like it burnt one of your main wires in the back of range. by turning a knob on you are getting a feed back. turn the power off remove back panel take a visual check of your wiring.

Posted on Dec 14, 2007

  • Sarah Meyers May 20, 2012

    This was exactly what happened in our case too.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

While cooking on my GE electric oven today I spilled water over the stove top by accident, now the iginite pilot wont stop sparking, what can I do to fix it? other than unplugging the oven as a quick...

If it's just water, unplug it for a couple of days and turn the switch back and forth a few times during these couple of days. The water should evaporate and your cooktop should start working again.If this did not help - one of the burner switches (or assembly with all switches and wiring, depending on model) will need replacement

Apr 03, 2010 | GE JKS06BFBB Electric Single Oven

1 Answer

Code : E3 -F1-

I have an Inglis electric stove with a self cleaning oven We turned the left dial to "CLEAN" and when turned the right dial to clean, a buzzer went off. Can you give me any advise?

Oct 17, 2009 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Double oven, top oven run by keypad turns off

I have a double oven. The top unit works fine. The bottle unit will turn on to cook or clean. Then after a few seconds it turns itself off.

Oct 12, 2009 | GE Profile JKP56 Electric Double Oven

1 Answer

Same for us...

Hello. I'll try to get your Oven working right again for you. If your cook-top burners all work properly and your oven does not work at all, it's your control board. If you will call us with your brand and model number, we'll get the right part out to you asap so you can start cooking those delicious meals again soon. 972-859-0929. We look forward to heaing back from you soon. Hope this helps! :>)

Oct 03, 2009 | Ovens

1 Answer

Our frigidaire flat-top electric stove stopped working

Sound like you make have a loose neutral on the cord where it attaches to the range or in the electrical receptacle where it plugs in, you can check the cord by pulling the range out, remove the small access cover to the cord connection area, after you have unplugged it and just tightened all the nuts to all connections on the cord. I advise an electrician to check the receptacle. I hope this has helped you. Have a great new year.

Dec 28, 2017 | Frigidaire FEB27S5A Electric Single Oven

1 Answer

Have a GE Electric Cook Top oven with digital

Unplug the stove. plug back in and program a short clean cycle. If this does not fix it is eithe the selector switch or the electronic control. Verifying the switch contacts with a meter is the only way to be sure.

Jun 21, 2009 | Ovens

1 Answer

Digital screen goes off oven will not work stove top is working fine

The "digital screen" is connected to the electronic control board which controls the oven (the surface elements on the stove top will not be affected by this problem). The "flickering on and off" could be any connection that feeds the electrical supply of the control board. Like something in the wiring harness that feeds the relay board, or the wiring harness that goes from the relay board to the electronic control board. It could also be the relay board or the electronic control board themselves. To isolate the problem you would need to check electrical supply to each board at the time of the "problem" when the "digital screen goes completely off." This would tell you where you "have" the voltage and where the voltage supply is lost. If it is a loose or burned wiring harness replace the harness or individual wire causing the problem if it turns out that it is the relay control board or electronic control board replace them. The relay control boards are typically around $75.00 and the electronic control board $150.00 and up. Might be cheaper to purchase another used oven or bite the bullet and buy a new range.

Nov 29, 2007 | GE Profile JTP18 Electric Single Oven

Not finding what you are looking for?
GE Profile JKP18 Electric Single Oven Logo

1,109 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides