Question about Televison & Video

1 Answer

Would just like to know where to get the calibration settings for a Hitachi 43UWX10b

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 167 Answers

If you are trying to set the convergence and it does not respond / you need to replace the convergence amp IC's (STK 392-110)and then adjust the alignment. It should respond at that point.

Posted on Jul 30, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hitachi Projection Color TV. The model # is 43UWX10B. It won't turn on - no picture or sound. Tech says it's the transformer, but parts aren't made anymore. Any idea where I could get part(s), how much...

I have worked on a lot of these and never seen a bad "transformer" try to get the tech to identify the location or part number needed. You can then search the internet or check with Hitachi.

To be honest the only way a tech could "KNOW" the part is bad is to replace it.

My guess is they could not find the problem and just wanted out and to collect whatever estimate fee they would get for looking at it.

A dead set can be caused by many things, rarely is it the transformer, I presume he is talking about the High Voltage transformer as that is the only major one in the set.


Jan 11, 2011 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

I have a hitachi 43uwx10b and i don't have the original remote. neither the universal remote i bought nor the remote that my cable company provided seems able to change the input. all these remotes do is...

Yes, almost ANY hitachi remote made in the last ten years will work.

The original will have a CLU-5722-TSI marked on the front. Lots of them on Ebay and other sites.

Google the model number with the word remote after it and see how many there are.

Lots of universal remotes will be missing functions only on the original remote. That remote will operate all the projection, LCD, PLASMA, and regular sets made by Hitachi for at least the last 15 years.

I know, it works on my 1991 Hitachi rear projection set perfectly.

Let me know if you have questions---avoid universal remotes like the plague.

If this told you something you did not know, rate this solution as very helpful as I do this here for free.


Sep 18, 2010 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

My tv has a bow in it every time a banner comes across

It is not unusual in these sets for things not to be perfectly straight---if the set has recently been repaired for a Convergence problem--someone may not have adjusted it correctly.

Understand: if it is a 43uwx10b Hitachi:

The green convergence is adjusted first for a grid of straight lines up and down and left/right---if the green grid is not straight you are going to see a bow when things scroll across the screen.

The other possible problem you may have is a convergence problem--if you go into the customer menu and try to adjust convergence--not the magic focus-- are the blue and red adjusting or not?

I know the HItachi sets very well--I own two of them and have repaired hundreds of them.

Let me know if you have more information or need advice--I am here to help people.

If this has helped you rate this solution as I do this here for free.


Nov 05, 2009 | Hitachi 43UWX10B 43" Rear Projection...

2 Answers

Manual Convergence adjustment on Hitachi 43UWX10B

I would guess you missed a open resistor--there are only about 12 of them--how did you check them?

This set (43uwx10b) has a tiny blue micro switch on the front of the chassis---if you engage it from the front the set will go into the DECAM or convergence mode--let me know the CLU number on your original remote and I will scan and paste instructions---98% of the time if the set is wacked out and will not adjust one of the resistors is gone---ONE OF THE CHIPS GETS THEM.


Oct 31, 2009 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Hitachi model 43uwx10b comes but no sound or

sounds like one of the transistors attached to a heat sink shorted out.
you will need to test each one with the tv unplugged.
set the digital meter on diode.
it`s not easy to explain the rest, sorry.

Sep 08, 2009 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer


They are Big Black ICs will have STK on them they are startup and convergence ICs They control set to turn on and off and convergence. Look for board that has them on it.2 of them together. If they are 110s use 180s ,Let me know what # on STKs you have.

Jan 06, 2009 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Hitachi tv 43uwx10b

RK46 is a 1.8 ohm 1watt metal film 5% tolerance resistor

Jul 14, 2008 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

My Hitachi 43UWX10B television

Needs Convergence IC

Dec 03, 2007 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Hitachi 43UWX10b tv ceeps bepping or cherping

Research at

Nov 04, 2007 | Hitachi 43UWX10B 43" Rear Projection...

2 Answers

43 inch Hitachi UltraVision model # 43UWX10B

Research at

Sep 30, 2007 | Hitachi 43UWX10B 43" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides