Question about Computers & Internet

1 Answer

I have a d-link model: dap-1160 and I want to set passuord

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,383 Answers

Access your router with following link

http://192.168.1.1
or
http://192.168.0.1

type user name as "admin" and password as "admin" or blank or "password"

then configure your router as WEP then go to wi fi security then set encryption key it is your password for connect wi fi .

Posted on Jul 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to configure dlink dap 1160


Ashraf, you could contact the manufacturer. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info.
DAP 1160 Wireless Access Point
http://www.dlink.com/-/media/Consumer_Products/DAP/DAP%201160/Manual/DAP_1160_B1_Manual_v2_00_EN.pdf
How to factory reset your Link router

May 06, 2016 | AccessData Password Recovery Tool Kit (ftk...

1 Answer

Why i can not go to sit for configure DAP-1360


Go to this link http://support.dlink.com/ProductInfo.aspx?m=DAP-1360 and download the user manual for your DAP-1360. Configure it in the WISP mode following the manuals instructions.

May 19, 2014 | D-Link DAP1360 IEEE 80211n (draft)...

1 Answer

My D-Link dap-1160 is not working


For routers not just the power light that should be lit. Are you using a modem/router? If so, there should be a DSL,INTERNET,WIRELESS light indicator as well. If the DSL light is OFF,steady red, OFF there might be trouble with your line connection. Call your Internet provider. Also, check cables (yellow cord, gray cord, telephone cord) that should be connected tightly to where it supposed to be connected.

Feb 26, 2013 | D-Link DAP-1160 802.11g Wireless G Open...

2 Answers

My dap-1160 doesnt work. only power light is on


Try to unplug power cord and wait for 20 seconds then plug the power cord back in. If still the same problem your access point is no longer functioning and you may need to call your provider to help you with further troubleshooting or there may be a need to replace your device.

Feb 26, 2013 | D-Link DAP-1160 802.11g Wireless G Open...

2 Answers

Dap 1160 Problem access web admin page


connect device directly to your computer using Ethernet cord. try to release and renew IP from the command prompt
IPCONFIG /RELEASE
IPCONFIG /RENEW
IPCONFIG /FLUSHDNS

then perform ipconfig. From there you will be able to get the IP address of the access point that you will need when accessing web admin page

Dec 22, 2012 | D-Link DAP-1160/B ACCESS POINT, WLESS G,...

3 Answers

I have DAP-1160 wireless G access point. My pc won't rekognize it. it worked befor reseting, after that the STATUS led does not blink.Not even when it's connected to the pc. What is the problem?...


I had the same problem with a DLINK DAP-1160, it did not seem to reset and I could not connect, nor PING it. It turned out that the box WAS resetting, and although the default IP address 192.168.0.50 and subnet 255.255.255.0 was being set, my computer was assigning itself up a private IP address and subnet 255.255.0.0. In the manual, it does say that you must be on the same subnet, so I changed my alternate IP address for my ethernet to be static and set the subnet to 255.255.255.0 and everything sprung in to life.

To summarise: make sure the computer you are using to configure the DAP-1160 has its subnet to 255.255.255.0.

May 08, 2011 | D-Link AirPlus Xtreme G DWL-2000AP...

1 Answer

I CANNOT LOG ON TO MY INTERNET VIA D-LINK DAP-1160 WITH MY WINDOWS 7


Turn off your DSL/cable modem.
Turn it on.
Turn off your router.
Turn it on.
Reboot your computer.

Jun 17, 2010 | D-Link Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...