Question about Arrow T50P ARROW STAPLE GUN

1 Answer

Cannot load staples - Arrow T50P ARROW STAPLE GUN

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,660 Answers

At the back of the staple gun is a flat shaped metal piece. It's at the bottom. Push in, pull down, then pull the mechanism out. You'll see it's a metal rod with a spring, that is attached to that flat metal piece. The spring pushes against another flat metal piece, that has a hole in it, and travels back, and forth on the rod.

The flat metal piece that the spring pushes down the rod, pushes against the staples.

Remove this spring mechanism, slide the staples down the rails. The staples will be in the position of an upside down U. Replace the spring mechanism, and lock it back into place. (Push in, pull up)

Should, your question be in reference to the fact that you have staples loaded, but upon pressing the trigger nothing comes out:

In the front of the staple gun, is a flat metal piece that pushes down on the staples. One staple at a time. The flat metal piece is shoved down by spring pressure. The spring pressure is applied to the flat metal piece each time you squeeze the trigger. (Flat metal piece = Hammer)

Sometimes, Two staples try to come out. When they do, this flat metal hammer is stuck up in the gun. To free the flat metal hammer, remove the spring mechanism out of the back of the staple gun. (The spring mechanism discussed above) Remove any staples in the gun.
Try to use a flat blade screwdriver, and see if you can shove the flat metal hammer in the front of the gun -> UP.
(DO NOT have the staple gun pointing at your face! DO NOT squeeze the trigger! DO NOT use excessive force)

If this method is of no avail for you, you have to disassemble the gun, and remove the metal hammer, and stuck staple/s.

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to load staples


Staples newly purchased will always be attached when purchased and that answers your question...wherever the device u are loading has a horizontal channel, there will be a loading window at the end. Take it apart by realeasing the cap or spring at the bottom and sliding the train of staples into the channel inside. Replace cap or spring lever to original position and secure. Stapler is now loaded.

Dec 12, 2015 | Electric Stanley Tre500 Staple Gun /...

1 Answer

How do i open the stanley tr110 staple gun to load the staples


Angelbabie...Like most things, it's pretty easy if you know how.

1.Release the loading latch located on the back end of the staple gun by pinching it with your thumb in a downward motion. This will release the catch and allow you to pull the loading slide out.

2.Hold the gun upside down (so the staple don't fall out) and place a stick of staples in the bottom of the channel which will be exposed once you pull back the loading slide.

3.Push the slide back in and make sure the latch is engaged. All good to go!

Happy stapling.

Mar 01, 2011 | Powerfast Stanley TR110 Light-Duty Staple...

1 Answer

How do you load staples


A piece comes out of the rear of the staple channel and the staples go in there.It is spring loaded to push staples to the front of the gun.

Oct 09, 2010 | Arrow CHROME STAPLE GUN ARROW IND....

1 Answer

Need help loading staples in my Stanley electric staple/nail gun


there should be a button / lever at the rear press it and it should open so as to insert the staples

Apr 05, 2010 | Stanley Staple/Nail Gun Elec

1 Answer

How do I load the staples in this staple gun?


Push in and down the silver color piece at the end of the gun. Pull piece and spring out. Load staples, end down. Reassemble.

Jul 07, 2009 | Arrow Fastener T27 Light Duty Household...

2 Answers

Can't load staples


Fire the stapler with the load chamber open and down, see if anything falls out. Point it in different positions and fire it, just make sure it cannot fire anything at you.

Apr 18, 2009 | Stanley Tools TRE550 Electric Staple/Brad...

3 Answers

LOAD IT


pull out the spring at the end of the gun. turn the staple gun upside down. Lay the staples in the track pointed side up, push in the spring slide so that it locks. You are ready to staple.

Nov 08, 2008 | Powerfast Stanley TR110 Light-Duty Staple...

1 Answer

Staple gun


Open the chamber and drop the staples upright in to the chamber do not try to load the staples by placing them on the strip that pulls out as you do with most staple guns.

Oct 26, 2008 | Stanley Bostitch Pc2000 Staple Gun Tacker...

Not finding what you are looking for?
Arrow T50P ARROW STAPLE GUN Logo

877 people viewed this question

Ask a Question

Usually answered in minutes!

Top Arrow Tools & Hardware - Others Experts

JOHN LAPIER

Level 3 Expert

2422 Answers

Paul Sikkema
Paul Sikkema

Level 2 Expert

171 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you an Arrow Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...