Audio Players & Recorders Logo

Related Topics:

FRED SCHNARR Posted on Oct 21, 2017

Does the docking station allw charging when the vacuum is mounted on the docking station?

5 Related Answers

sparky1500

Matthew Spark

  • 1066 Answers
  • Posted on May 17, 2008

SOURCE: Docking station fror compaq Evo n610c

docking station for my old compaq armada did not "charge seperately" but did supply power to the pc through docking connector and not through the normal ac input, cant say if they have their own power transformers or not, till i go home and take my old docking station apart. Will the computer not power up when plugged in, it normally will run off ac power even when battery is dead or removed.

Ad
bobfiala

bobfiala

  • 28 Answers
  • Posted on Nov 14, 2008

SOURCE: Roomba Docking Station

Probably not, unless you just have to have the docking station. My roomba always had trouble mating with my docking station so I never used it. I just plugged it directly in to will using the AC adapter.

Anonymous

  • 71 Answers
  • Posted on Jun 01, 2009

SOURCE: does the new bose dock station charge the new ipod touch (32g)?

The new SoundDock II charges your new iPod touch and is fully compatible all iPods and the iPhone 3G. Also the SoundDock Portable will do this. But..
Better news-> Call Bose. They can upgrade the 30-pin connector to charge via USB-only and function with the remote as well. $99. This will make your iPod touch 100% compatible and somewhat future-proof your SoundDock. If the SoundDock was purchased within 90 days (at full retail price), they will do the upgrade for a smaller fee or even free I think.. (new 1 year warranty given with repair/mod) btw- This is an Apple issue, not a Bose issue. All 3rd party iPod connection devices had to make this change at some point.

Anonymous

  • 1 Answer
  • Posted on Jul 08, 2009

SOURCE: ipod nano not charging on jbl docking station 2

my apple ipod is not charging what should i do plz help me [nano 3rd genaration]

Anonymous

  • 1 Answer
  • Posted on Oct 16, 2009

SOURCE: new ipod won't charge on bose docking station

I have been looking for sometime and have finally found a 3rd party power converter. Another solution is to send your docking station to Bose and for $99.00 they will repin the dock so charging will work. The converter and adapter only cost about $30.00. Here is the link to the site I ordered from. I just ordered it so I am not abot to confirm functionality yet.....
http://www.griffintechnology.com/products/firewire-to-usb-converter

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have roomba 880 stationed in open w/nothing blocking view (virtual walls, lighthouse, doors, etc) but it will not go back to docking station even when I press docking and its only 6 feet away.

it seems as if the robotic cleaner is having a problem sensing where it is or failing to notice where its charging station is try cleaning any optical/IR sensors and it maybe able to see once again where its charging dock is
2helpful
2answers

Inherited from family member who moved away, can't see how the charging cord fits into docking station as it doesn't line up with hole on vacuum body when inserted into docking station.

Hi there, it's Jack at Dyson.

All DC59 models were supplied with the docking station design shown below, which sounds as if it's the one you've seen in videos online:

inherited-from-family-member-moved-away-bgnlnjysxqgtkkq3zluwq2tk-4-0.jpg

From your description, it sounds like the docking station you've inherited may belong to an older Dyson cordless vacuum, such as DC35 or DC44. If you're able to call the Dyson Customer Helpline directly, we should be able to help determine exactly which docking station you have, and whether or not it's compatible with your DC59.

You can reach our experts by calling 1-866-693-9766 (US), 1-877-397-6622 (CA) 1800 239 766 (AU), or 0800 298 0298 (UK).
0helpful
1answer

How to fit wall bracket

Hi there, it's Jack at Dyson.

When installing DC59's docking station, use appropriate hardware/fixings for your wall type and ensure that the dock is mounted securely. Ensure no pipe work (gas, water, air) or electrical cables, wires or duct work are located directly behind the drilling area. The dock must be mounted in accordance with all local laws and regulations and applicable codes and standards. Dyson recommends the use of protective clothing, eye ware and materials as necessary.

The charger cord assembly attaches to the docking station as shown below:

fit-wall-bracket-wwjhwhxcdangi3pthjaixvoq-2-0.jpg

I hope this information helps. If you need any further guidance, you're welcome to give the Dyson Customer Helpline a call on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).
0helpful
1answer

How do i remove the power supply socket from the dyson wall mount

Hi Les, it's Jack at Dyson.

The end of the charger cord assembly which attaches to the machine itself is held in place securely by a friction-fit connection. You should be able to use something like a flat-bladed screwdriver to free the end of the charger cord from the docking station. Then with the docking station removed from the wall, you should be able to disconnect the charger cord completely from the rear of the dock, following the route shown in the image below:

remove-power-supply-socket-from-dyson-wwjhwhxcdangi3pthjaixvoq-2-0.jpg

I hope this helps - if you'd like any additional advice you're welcome to give the Dyson Customer Helpline a call on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).
0helpful
1answer

Have mislaid instructions for docking station wall mounted for dyson animal doc 59. Where can I find please ?

Hi there, it's Jack at Dyson.

Just to confirm, were you looking for directions on installing DC59's docking station? If so, please email me directly at [email protected] so I can provide you with these, and answer any other questions you may have.

I'll look forward to hearing from you.
0helpful
1answer

Roomba stopped after 45 minutes. does not move. manually placed on docking station...nothing

Sounds like something's dead either with the roomba or the charging station or power supply. Does it charge up if you plug the power supply directly into the roomba, instead of into the charging station? If not, you'll probably have to return it to the place you bought it.
0helpful
1answer

I have a T2+ remote sys and need a manual. as a start I need to know how to charge.

The remote comes with a charging dock, if you did not get this you can order one from RTI (952) 253-3136.

BATTERY AND DOCKING STATION
The T2+ uses a Lithium-Ion rechargeable battery. This battery does not exhibit any type of "Memory Effect" from being charged too often. Since the T2+ can safely be charged after each use, a docking station is included for convenience. If left out of the docking station, the T2+ will remain in sleep mode for 1 or 2 months before shutting down. At that point the battery must be recharged. The T2+ Docking Station can be placed on a flat surface such as a shelf or table, or it can be mounted to a wall using the mounting holes on the back of the unit. If the T2+ battery capacity is reduced to approximately one hour of remaining run-time, a low battery icon will appear in the upper left corner of the display The docking station LED illuminates to indicate a charge in progress. The LED will turn off when the battery in the unit is fully charged.A fully discharged battery will take approximately 2-4 hours to completely re-charge.The T2+ can remain in the docking station indefinitely without damage to the battery.
1helpful
1answer

I unplugged the docking station and now does not work

I actually had the same issue with mine.. it was 6 years old and just stopped finding the docking station. Also wouldnt take a charge. So I just eliminated the docking station. The stations power cord will charge the unit. Hope this helps.
1helpful
2answers

Roomba Docking Station

Probably not, unless you just have to have the docking station. My roomba always had trouble mating with my docking station so I never used it. I just plugged it directly in to will using the AC adapter.
0helpful
1answer

Charging Camera

I would test the docking station first. Do you have a way of charging the camera without using the docking station?

Thought I'd ask because some can and some can't.

Not finding what you are looking for?

37 views

Ask a Question

Usually answered in minutes!

Top The Audio Players & Recorders Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a The Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...