Question about Office Equipment & Supplies

2 Answers

What do I do when my Canon Image class MP730 says "WASTED INK NEAR FULL'

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

You have to look where the print cartridges are when resting in the normal position,Just below the print heads are small sponges the need to be removed and cleaned or replaced.You can take them out with a pair of tweezers

Posted on Jul 29, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 122 Answers

The excess ink pad is almost full and needs replacing. Check this link for more information about ordering and replacing it.

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=9035

Good Luck

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connon mp730error ##334


#334 is an eprom error and if turning on and off does not reset it, you have something going on with the main logic board.
http://printer1.blogspot.com/2009/01/canon-multipass-mp730-service-manual.html
Above is a service and repair manual this will assist you to troubleshoot and hopefully repair, although I fear with this type of fault, it needs to be returned to the factory.

May 15, 2010 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Waste Ink Near Full on Canon MP730


I dont know the exact process that I have done before, however the trick is to zero your page count, and this worked twice for me. The printer figures your waste ink reservoir (actually a sponge) is near full by a page counter. There are articles out there on how to repair this physically but please dont go there, get a new printer or even better an less used MP730.

Mar 27, 2010 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Ihave Canon MP730 Image Class Printer. It seems to be incompatible with Windows 7.Please help me.


Have you had your printer for awhile and recently upgraded your operating system to Windows 7? If so, you need to download a new printer driver (and software) from the Canon website for Win7.

I recommend that you uninstall your printer and software before re-installing the software from the following link at Canon support:

Canon MP730 Downloads

Choose your operating system (Windows 7 or Windows 7 x64) from the drop-down box.

Download the driver file and any additional software as needed.

Run the driver installation routine and follow the prompts to re-install your Canon MP730 on your computer.

Run the install routine on any additional software.

I hope this helps!

Mar 06, 2010 | Office Equipment & Supplies

1 Answer

How to fix a message: Waste Ink Near Full on Canon MP730 Multipass printer


Instructions for resetting the MP730 ink tank full counter
1) Enter SERVICE MODE.By
pressing MenuCopy#
2) Select TEST MODE. using the + key then the set
3) Select [8] PRINTER TEST in TEST MODE. by hitting the number 8
4) Select 3. [EEPROM CLEAR]. by hitting the number 3
5) Select 0. [INK COUNT]. by hitting the number 0
6) Let it default to the new value by waiting
7) Press the [Stop/Reset] key (returning to the state of 3)), this is the red stop key
8) Then press the [ON/OFF] key and the machine will reset and push through a page of paper

Sometimes is need to clean the purge unit

Canon MP730 Printer Purge Unit Disassembly and Assembly :
http://newsquaremusic.com/CanonMP730PrinterPurgeUnitDisassemblyandAssembly.pdf

http://newsquaremusic.com/CanonMP730PrinterWasteInkTankFullResolution.pdf

I hope this is useful

Oct 03, 2009 | Canon Office Equipment & Supplies

2 Answers

Problem with printer Canon Smartbase MP730


343 tells you that the ink absorber is full, it needs to be replaced and then the error reset in the diagnostic mode by a canon tech.

Jul 07, 2009 | Canon SmartBase MP730 All-In-One InkJet...

1 Answer

Waste ink near full


Try this Manual Reset procedure for waste ink tank full error in Canon Smartbase MP730 printers:
  • Hit the “menu”: Key
  • Hit “Copy” Key
  • Hit “#” Key
  • Scroll thru the menu headings until you come to “Test Mode” - 12th heading
  • Hit the “3′ button- this will bring up Eeprom Clear
  • Hit “0′ button
  • Hit the “Stop” button
Good luck!

May 16, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Where is a waste ink i have error message says WASTE INK NEAR FULL help me on that, thanks


I have had this problem. There is a counter in your printer that must be reset to move on. The ink tank may not be full, but the counter estimates it is full (and maybe it is an instruction to you to buy a new Canon printer), and to actually empty the ink tank would be an uneconomical task. How do you do it, there are a number of helpers here so Google: MP730 waste ink near full.

Apr 27, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Problems installing my printer


From Canon download page download driver for your OS and install it.
Download and follow instructions in user manual too

Feb 22, 2009 | Canon SmartBase MP730 All-In-One InkJet...

1 Answer

CANON MP730 ERROR MESSAGE 343 WASTE INK FULL


1-press the "menu" key
2-press the"copy" key
3-press the"#" key
scroll thru the menu heading until you come to "counter"
press "ok"
press "menu"
and select "clear all" it will ask you to "please wait"
then press menu two times
restart your printer
it will work

Feb 22, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...