Question about Televison & Video

2 Answers

Screen got hit by a wii remote can it be replaced by its self

Posted by on

  • snakedoc9723 Jul 29, 2009

    its a rear projection tv and its only a minor scratch bout 5 in

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 563 Answers

If you have an LCD or plasma, the screen costs more than what you paid for the TV. Really! It's called the panel in the industry, and it's the most expensive part of the TV. If have a rear projection or DLP, the screens cost hundreds to replace. But and LCD or Plasma will cost $1,000 and up for 27" and above. Wal-Mart.com has a 42" LCD for $578.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

Posted on Jul 29, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Well, since its a rear projection, a replacement screen will only set you back a few hundred with shipping and installation.

Posted on Jul 29, 2009

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: i hit the screen with the wii remote. its damaged

its dead, you hit it with a wii remote. as this fella said dont bother replacing the pdp/lcd modual (screen) it will eclipse the price of the tv or close to it. In my shop i get kids comming in all the time wanting me to fix thier parents 55 inch tv's before they get home from vacation. it cracks me up. no pun intended

Posted on Mar 02, 2010

freelance-au
  • 131 Answers

SOURCE: The lcd screen is cracked due to a Wii remote

Hi
Remove the back of your tv and you will see a sticker with the part number of the screen on the screen itself, Take this down and Ebay for a replacement there a plenty on there at around £75 with shipping.
Hope this helps

Posted on Apr 09, 2010

Testimonial: "Thats great thanks so much, will let my husband do the technical stuff. Thanks again"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adding second remote for jeopardy so 2 people can play at the same time


when in any game, when you are ready to add additional remotes, on player 1's remote, hit the center wii "home" symbol. Then at the bottom of the screen you will see the "remote settings" bar. Hover over it with player 1's remote, click it and follow the on screen directions. Hope this helps!

Jan 16, 2011 | THQ Jeopardy for Nintendo Wii

1 Answer

When wii is turned on the start screen that shows the remot and asks to hit a comes up in three different languages can not move pass that? Remotes not responding


try syncing your remote by doing the following (and make sure batteries are good)
  1. Press the Power button on the Wii console to turn it on.


  2. Open the SD Card Slot cover on the front of the Wii console. Remove the battery cover on the back of the Wii Remote you wish to sync up.


  3. Press and release the SYNC button just below the batteries on the Wii Remote; the Player LED will blink. Quickly press and release the SYNC button on the inside of the SD Card compartment on the console.


  4. When the Player LED blinking stops, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

Jan 16, 2011 | Nintendo Wii Console

2 Answers

I hit the screen with the wii remote. its damaged


It is obvious that the screen is cracked and must be replaced. There are a few problems in doing that. First, it is NEVER covered b warranty. Second, the LCD panel likely cost at least double the price you paid for the TV, if it is even available. Many are not available. Time to shop for another set. Sorry; John

Feb 06, 2010 | Samsung LN40A550 LCD TV

1 Answer

Wii remotes dont work on the tv screen replaced batteries in both remotes still does nothing


If you ahve checked for all possible obstructions or made sure tha tyour sensor bar is plugged try to re-sync your Wii remotes. Unplug your Wii for about 30 seconds and then plug it back in. Upon seeing the health and saftey screen hold down the sync button on your Wii console for 15 seconds. This clears out any previous Wii Remote Syncs. After that is performed open up the battery cover on the Wii remote you want to sync and hit the red button, soon after you do that hit the red sync button on your Wii Console. If it syncs properly the blue LEDs on the bottom of the controller will corespond to the # remote it has been synced to. Good luck.

Dec 29, 2009 | Nintendo Wii Console

1 Answer

The wii remote is not working cause the light is not showing .


1. Check the batteries in the Wii remote. 2. Synch the Wii Remote with the Wii Again.
If you are trying to play as a guest. You'll have to let the Wii Remote that is partnered with that machine power it up, and then hit the home button on that Remote and you'll see the batteries aat the bottom of the screen. Click the Wii Remote there.. and then resynch.

Apr 26, 2009 | Nintendo Wii Remote Controller

1 Answer

The wii remote curser does not show up on the screen.


Check that the batteries are fully charged and make sure that the top end of the control is clean (no finger prints etc...) and that the bar that sits on your tv is centered correctly and plugged in correctly

Jan 17, 2009 | Nintendo Wii Console

1 Answer

Wii remote


Greetings baggie bird,

You need to resynch your remote to your Wii console.

You hit the sync button under the battery cover on the remote, and then when the lights are flashing on the remote, you hit the sync button on the Wii. The synch button is located under the small cover to the left of the cd/dvd slot.

Thank you,

Dort
Go Ahead. Use Us.

Apr 19, 2008 | Nintendo Wii Console

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

568 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...